Haier HWM150-287S, User Manual, Page: 16 / 20

Wipe the complete unit with soft
cloth twisted dry.
Wipe with neutral detergent if too dirty
Do not wash it directly by water
&OHDQLQJ WKH RYHUIORZ ILOWHU
2. Take off the corrugation pipe.
Dismantle the upper part of the
corrugation pipe
inside the
overflow filter (
).
3. Cleaning the overflow filter
Clean the lint around the filter
and flush with tap water.
4. Install the filter.
(1).Install the corrugation pipe.
Insert the mounting plate at
the bottom of the into
the valve cover.
Hang up the hook at the left
upper side.
Push the upper part in as
indicated in Figure 2.
as indicated in
Figure 1
overflow
(2).
filter
(3).
(4).
Corrugation
Pipe
Hook
Figure 1
Figure 2
Water level
adjusting lever
After washing, dismount the water inlet
hose.
Do not store water in the tub for long
period. Discharge the water immediately
after each using.
Pull off the power plug and hang up the
power cord.
Hang up the drain hose.
Wipe off the water drops on the surface
and inside the tub with clean soft cloth.
Open the cover of the wash tub and the
inner/outer cover of the spin tub for
some time (about one hour), then close
them.
'LVSRVDO RI WKH FRPSOHWH XQLW
Thinner
Alcohol
Petrol
14 14