Haier HWM150-0623S User Manual Download Page 8

Preparation  before  washing

Pay  attention  to  followings  before  washing  the  laundries 

Check      if 
the  laundries 
has  special 
requirement 
on  washing

Clear  the 
pocket.  Take 
out  the  coins, 
sand,  hairpins 
etc.

Tie  the  long 
strips;  fasten 
the  buttons; 
close  zippers.

When  the  pulsator
is    running    ,      the 
buttons      of        the 
laundries  may 
cause  noise.  For 
the  sake  of 
discretion,  please
put  the  laundries 
with  buttons    into 
other  laundries.

The  quantity  of 
the          laundries 
shall  not  be  too 
large.        Stretch 
and    loosen  the 
laundries  before 
putting    them  in
the  tub.               

a.  Check  if  the  laundries  are  applicable  for  washing  with  machine.
b.  Divide  the  laundries  that  are  not  colorfast  from  other  laundries.
c.  Put  those  laundries  difficult  to  absorb  water  into  water  with  hand.
d.  For  those  laundries  with  heavy  soil,  please  first  remove  the  dirt  like 
        mud  or  dust.  For  the  parts  with  heavy  soil,  please  apply  detergent  on 
        them  in  advance,  which    can  make  it  easier  to  remove  the  soil.
e.  For  those  laundries  that  may  get  lint  ball  and  those  with  long  fur,  turn 
        it  over  before  putting  in.
f.    Do  not  put  those  laundries  polluted  by  chemicals  into  the  washing 
        machine  directly.

6

Preparation  before  washing
1.Connect  the  water  inlet  hose.
2.Confirm  that    the  washing  machine  is  earthed
    reliably  .    Then    insert    the  power  plug  into  the
    receptacle.  Do  not  connect  the  earth    terminal
    to    the  gas  pipe  and    tap  water  pipe.
3.Put  the  drain  hose  up  to  suitable  position.

4.Slanting    or    uneven    ground    may    result    in 
    unstable  working  or  abnormal  noise.  Please
    make  the  machine  stand  horizontally. 

Summary of Contents for HWM150-0623S



















Reviews: