Control Panel
After the power is switched on, press it to start the machine.
When operation in progress, press the button if you want to pause.
Press the button again if you want to resume the operation.
"Start/Pause" button
12
Tub clean
Press the button “Set” and “Program” simultaneously to select the tub clean
function. This function is to clean the inner and outer tub of the washing machine.
Please ensure the soaking time is at 10 hours and use the “Spin” cycle alternately
to optimize the cleaning impact.
Remove the laundry when tub clean in progress.
“Set” button
"
Process
" button
Delay
How to activate Delay function:
Press the button “Process” to select the Delay function, the display will shows “00”
and the rest of the indicator lights will off. Select the program that you required
and choose a delay of between 1 to 24hours (in 1 hour increments) to complete the
wash . For example, you may choose to finish the wash at 18 hours later.
Delay mode is not applicable for Tub clean function.