Haier HWM120-01 User Manual Download Page 10

1 Preparation before washing

Pay attention to followings before washing the laundries 

Preparation before washing

1.

Connect the water inlet hose. Open the water faucet.

2.

Confirm that the washing machine is earthed reliably. 

Then insert the power plug into the receptacle. The 
earth terminal shall not link to gas pipeline and
 faucet water pipeline.

3.

Put up the drain hose.

Pay attention to followings before washing the laundries 

Check   if 
the laundries 
has special 
r e q u i r e m e n t
on washing

C l e a r   t h e  
pocket. Take 
out the coins, 
sand, hairpins 
etc.

Tie the long 
strips; fasten 
t h e   b u t t o n s ;  
close zippers.

When the pulsator
is  running  ,   the 
buttons

of    the 

l a u n d r i e s   m a y  
cause noise. For 
t h e   s a k e   o f  
discretion, please
put the laundries
with buttons  into 
other laundries.

The quantity of
the     laundries
shall not be too
large.    Stretch
and  loosen the
laundries before
putting them in
the tub.

a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust.
    For the parts with heavy soil, please apply detergent on them in advance, which
    can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before 
    putting in.
f.  Do not put those laundries polluted by chemicals into the washing machine directly.

Summary of Contents for HWM120-01





















Reviews: