Haier HWM110-23BS User Manual Download Page 9

7

Preparation before washing

Pay attention to followings before washing the laundries

Check  if 
the laundries
has special
requirement
on washing

Clear the
pocket. Take 
out the coins,
sand, hairpins
etc.

Tie the long
strips; fasten
the buttons;
close zippers.

When the pulsator
is  running  ,  the
buttons of   the
laundries may
cause noise. For
the sake of
discretion, please
put the laundries
with buttons  into
other laundries.

The quantity of 
the     laundries
shall not be too 
large.    Stretch
and  loosen the 
laundries before 
putting  them in
the tub.

a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like
    mud or dust. For the parts with heavy soil, please apply detergent on 
    them in advance, which  can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn
    it over before putting in.
f.  Do not put those laundries polluted by chemicals into the washing
    machine directly.

Preparation before washing
1.Connect the water inlet hose.
2.Confirm that  the washing machine is earthed
  reliably .  Then  insert  the power plug into the
  receptacle. Do not connect the earth  terminal
  to  the gas pipe and  tap water pipe.
3.Hang up the drain hose .

4.Slanting  or  uneven  ground  may  result  in 
  unstable working or abnormal noise. Please
  make the machine stand horizontally.

Summary of Contents for HWM110-23BS



















Reviews: