manualshive.com logo in svg

Haier HWM105-0626S, User Manual, Page: 4 / 10

Share
Download
Haier HWM105-0626S User Manual Download Page 4

2

Safety precautions

Please insert the power cord into 

special receptacle with rated vol-

tage.Be sure to use single-phase

 three pins  receptacle.The earthing

 terminal of the receptacle must be

 earthed reliably.If possible,please 

adopt electric leakage protector.

When the machine is normally

using, please put  the power plug

at the location easily to be insert-

ed and extracted by hand. Be sure

to pull the plug off when there's

power failure, or the machine is 

being moved, cleaned or when it 

is idle.

Do  not  put  the  machine  at  damp

place like  the  bathroom .  Never

wash  it   with water. Do not place 

wet laundries on the control panel.

Do not wash water-proof laundries like

the raincoat,  bike  covers etc. to avoid 

abnormal vibrations.

Do not let the machine share one receptacle

with  other electric  appliances. If  the  power

plug  is  damaged,  or  the  plugging  into the

receptacle  is loose, do not use the plug any

more.

Ve

ntilation hole at 

the  bottom of the

washing

machine

If the

 supply cord

 is damaged,it

 must be

 replaced 

by the

 manufacturer or

 its service

agent or

 a similarly

 qualified person

 in order

 to avoid

 a hazard.

Do not use water hotter than 50 C .

For washing

 machine with

 ventilation 

openings in

 the base,

 that a

 carpet

 must not

 obstruct the

 openings.

15

If the laundries fall to the outer side of the spin tub

T

rouble-shooting

Please check carefully.

 The

 laundries may fall to the

lower part of the outer side of the spin tub ( Figure 2).

If  the laundries  fall to the outer side of  the spin tub,

   during spinning the draining will get blocked and the

   rotation speed of the spin tub is reduced.

If the laundries fall to the outer side of the spin tub, Please

take it out quickly.

Spin tub frame

Figure 1

Figure 2

Laundries

Spin tub 

Figure 3

1.Disma

ntle

First tak

e two

 plugs o

ut, then

 dismantle

 the two

screws

which fi

xed the

 Spin tu

b frame

.

As

indicated

 in  the

 figure, 

push the

 point m

a

rked

with  "

"  to

pull  the

  spin  tu

b  frame

  to obliq

ue

upwards

  to dism

antle it.

2.Install

After install the back edge of the spin tub frame to

proper position, push the four points marked with

"

" by force to reset it,  fix it with screws, then 

fixed the two plugs at the position.

Figure 3

Summary of Contents for HWM105-0626S











Reviews:

No comments