background image

The capacity of  washing  and spinning  of the 
machine refer  to the largest  weight of the
standard laundries under dry condition that can
 be washed or spinned in one time. Laundries
quantity  in one  washing cycle shall  be  lower
than   the   rated  capacity.

The thickness ,size , type  of  the cloth  will influ-
ence  the actual  washing  capacity.  It is  suit-
able to put  in reasonable amount of laundries
and  the laundries can be turned round in wash-
ing for one time washing.

Do  not   select  "  Maximum  "  water   level   for
 laundries  less  than  2.4kg, so as to  avoid 
splashing of water.

The musts in washing 

How to use the whitener

Fill water to decided level.  Dilute
 the whitener with container.
Pour it slowly into the washing tub. 

Avoid  using  whitener  on  laun-
dries with color or pattern as they
 are prone to lose color. 

The  whitener  shall  not  touch
the laundries directly. 

Direct dissolved in the machine:
1.Fill small quantity of water.
2.Add the powder .  Run for  30 
  seconds  to dissolve it completely.
3.Put it in the laundries. Select suitable 
   water level.

The instant dissolving of the washing 
 powder:
1.Prepare warm water of 30 C and a 
   container.
2.Add the powder while stirring to fully
   dissolve it. 

The powder is more prone to pollute the
laundries than the detergent. Therefore
please use it with proper quantity. 

Dosage of different washing powder is
different. Please refer to the instruction
of  the  washing  powder  for  the  detail
dosage.

Refer  to  the  user's  manual  for
the usage and quantity of the
whitener.

For powder whitener, please 
dissolve it before using. 

How to use the washing powder

Usage of the detergent 

8

Summary of Contents for HWM-13.0/S




















Reviews: