Haier HWF5000, User Manual

Page: 19 / 30

English
16
Detergent Capacity of
Wash (lbs.)
5. Speed Wash/Spin
• Once the power is switched on the machine will automatically set to
Normal/Fast. Press button to change selection.
6. Soil level
• When the washer is powered on, the machine will automatically set at
Heavy Duty. Select different soil levels by pressing this button.
7. Temperature Wash/Rinse
• Initial setting is Warm/Cold when washer is powered on. Press this button to
change selection based on clothes put in the washer.
8. Cycle Signal
• This is set at Low when washer is started. Press button to adjust.
9. Delay Start
• To start the washer at a later time press the Delay Start button and set
the time.
• When activated the indicator displays 2. Push button once for every 1 hour
delay for up to 24 hours.
• Press start button to activate Delay Start.
• When the delay timer starts the program select indicator turns off. The
indicator will display the remaining time to turn on the unit. In the lower right
corner of the display, a blinking light will indicate that Delay Start has
been activated.
• By pressing the Delay/Start button the selected Process programs will be
displayed. By altering the running program, the washer will have to be reset.
10. Start/Pause
• Press this button when you want the machine to start.
• During operation, press this button to pause and press it again to
resume operation.
Note:
Opening the top lid will stop the machine except during water filling
or draining.
Note: Total time may be affected by water inlet and drain time. It may also
be affected by the water pressure. Normal, Heavy Duty and White
programs could combine the process of Pre-wash during which the
washing machine first Pre-wash for about 20-30 minutes, with slight
pulsation after water filling and then begins to wash.