Haier HWD100-BP14959S8, User Manual

Page: 29 / 32

28
9.8 Electrical Connection
Before each connection check if:
power supply, socket and fusing are appropriate to
the rating plate.
the power socket is earthed and no multi-plug or
extension is used.
the power plug and socket are strictly according.
Put the plug into the socket (Fig. 9-8).
9-8
WARNING!
If the supply cord is damaged, it must be replaced by the service agent (see war-
Note: Drum Clean
tenance run programme Drum Clean with no load and small amount of detergent in
s
wa-
hing agent compartment (2) or with special machine cleaner to remove possibly
u
corr-
After each installation or long periods of disuse, before first use and for regular main-
ptive residues.
9.7 Fresh Water Connection
9-7.2 9-7.1
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled end
to the appliance (Fig. 9-7.1).
Tighten the screw joint by hand
2.
(Fig. 9-7.2).
ranty card) in order to avoid a hazard.
Always ensure all the power supply, drain and fresh water hose are firmly
connected, dry and leak free.
Ensure these parts are not crushed, kinked or twisted.
9-Installation