9-Installation
9.5 Adjusting the
●
feet
Install
●
the appliance on solid ground. Adjust all feet
(Fig. 9-9) to achieve a complete level position. This
will minimize vibrations and thus noise during use. It
will also reduce wear and tear. We recommend to use
a spirit level for adjustment. Floor should be as stable
at as possible.
9.4 Moving the appliance
If the machine is to be moved to a distant location, replace the t ransport protection
befor installation to prevent damage. The assemply takes place in reserve order.
Note: Keep in safe place
Keep all parts of the transport protection in a safe place for later use. Whenever the
2. Remove
10screws (R1-R10)
from back reinforcement
(Fig. 9-6) and put aside.
3.
Pull out the 2 iron bars I1 and I2 (Fig. 9-7).
4.
Fill the 6 left holes with blanking plugs (Fig. 9-8).
R1-R4
9-6
I1
I2
9-7
9-8
appliance is to be moved at first reinstall the protection parts.
R5-R10
28