Press the “ Wash ” button to set
washing time.
Display washing program,
washing time, remaining
time,delay time,times of
rinsing, spinning time,
temperature setting value,
child lock state,door lock
state ,program progress and
alarm message,etc.
After setting relevant
parameters, press the
“Start/Pause” button once, the
selected program will
automatically start running. If
this button is pressed when the
program is running,the program
will pause;to continue the
program,just press this button
again.
Note: Washing time doesn’t
include water-feed time and
heating time.
Press the “Rinse”button to select
the times of rinsing and the
maximum allowable times of
running is 8.When the display
screen doesn’t display the times of
rinsing, it indicates that the
washer-dryer will not perform
rinsing.
Press the “Spin” button to select
spinning time. The maximum
allowable spinning time waries with
programs.When the display screen
doesn’t display the spinning time, it
indicates that the washer-dryer will
not perform spinning.
The spinning time means the time
for spinning at high speed.
Press the “Dry” button to select the
“Dry” program.
The “Dry” program is only available
in the “Wash & Dry” and “Dry”
modes.
Press the “Temp.” button to
select the heating temperature
(30, 40, 50, 60, 70, 80 or
90).The maximum allowable
heating temaperature varies
with program.
When the display screen
doesn’t display the
temperature, it indicates that
the washer-dryer will not heat
for washing.
6. Control Panel and Program Description
“Washing” time
Display screen
“Delay” selection
“Temp.” selection
“Start/Pause” button
Before starting the selected washing program,press the “Delay” button once and
set the delay time by turnng the program knob. the delay time (0.5-24h) increases
(decreases) with the increment of 30 minutes by clockwise (anticlockwise) turning
the program knob. Press the “Start/Pause” button, the selected program will start
and the delay time will start counting down. After selecting the “Delay” function but
before starting the selected program,press the “Delay” function will be canclled.
The delay time is the end time of washing. For example,6:00 means the washing
ends after 6 hours (if the delay time is shorter than the time required by program
running,the washing program will start running immediately after pressing the
“Start/Pause” to start the “Delay” program).
This function is not available for “Air-wash”,”Drying with rack” and “Self-clean”
program.
Press the “Speed” button to
select spinning speed.The
maximum allowable spinning
speed varies with program.
Three modes (i.e. “Wash”, “Wash & Dry” and “Dry” ) are optional for
this washer-dryer.
Press the desired mode button, corresponding indecator light will be
on.
Select the “Wash” mode to wash, rinse and spin the clothes; select
the “Wash & Dry” mode to wash, rinse, spin ahd dry the clothes;
select the “Dry” mode to spin and dry the clothes.
n
o
tt
u
b
”
e
d
o
M
“
n
oi
tc
el
e
s
”
d
e
e
p
S
“
“OFF”
button
“ON”
button
Press the “ON” button to
power on.
When the power is on,press
and hold the “OFF” button for
3s to power off.
If no button is pressed within
5 minutes after power-on or
the autumatic program
running ends, the
washer-dryer will
automatically shut down.
After turning on the washer-dryer,select the desired washing program by turning the knob.Press any function button (e.g. “Speed”,
“Temp.”, “Delay”, “Dry”, “Spin”, “Rinse”, “Wash” button ) once and turn the program knob within 3s to set televant parameters.
After turning on the washer-dryer,the “Spin” program can be selected by anticlockwise turning the program knob.
This washer-dryer is set with the “Auto” function.In this mode, turn on the washer-dryer,put the clothes to be washed in it,close the
door and set other relevant parameters,then press the “Start/Pause” button, the display screen will display “AUTO”; about 2 minutes
later, the washer-dryer will finish weighing and the display screen will display the position of clothes weigh (”AL-1”~”AL-5”); and the
washer-dryer will automatically select the optimal washing program.This function allows the washer-dryer to save water,electricity and
time significantly.
If you do not want the washer-dryer to weigh the clothes automatically,turn the program knob when the washer-dryer is weighing
automatically and the diaplay screen display “AUTO” to switch to manual selection of clothes weight position
(”AL-1”,”AL-2”,”AL-3”,”AL-4”,”AL-5”). When “AL-1” displayed on the display screen is flashing,you may select another position by
turning the program knob again within 4s. If you don’t do so within 4s, the program will automatically confirm the “AL-1” position.
(1) In manual mode, it is recommended that “AL-4” or “AL-5” be selected to wash large amount of clothes (more than a half drum);
(2)If the washer-dryer automatically weighs the clothes,it will automatically set the position as “AL-1”,”AL-2”,”AL-3”,”AL-4” or “AL-5”.
(3)Please adjust the dosage of washing powder according to the position displayed on the display screen.
Program knob
