Power
Heavy
Underwear
Sport wash
Night
Quick
Spin
Tub Clean
Wash
Rinse
Spin
Temp.
Speed
Auto
Silk
Wool
Synthetic
Memory
Cotton
Anti-crease
Prewash
Delay
Strong
Start / Pause
Press and hold 2seconds
to set door unlocked
HW85-B1486NZP
8.5kg
6. Control Panel and Program Description
• Press the “Wash”
button to set washing
time. Press and hold
this button to change
the time continuously.
Click this button up until
the end.
• This function is not
applicable to “ Spin ”
and “ Tnb cleaning ”
process
Display washing time,
remaining time, times
of rinsing, spinning
time, temperature
setting value, speed
setting value, position
of clothes weight, child
lock state, door lock
state, washing
progress and alarm
message, etc.
Press the “Spin”
button to select
spinning time. The
maximum allowable
spinning time varies
with programs.
Press the
“Rinse” button
to select the
times of rinsing
and the
maximum
allowable times
of rinsing is 8.
• Press the “Temp.”
button to select
heating temperature
(--, 30, 40, 50, 60,
90). The maximum
allowable heating
temperature varies
with programs.
• “
ˉ
” in the
temperature display
indicates non-heated
washing.
Press the
“Speed” button
to select
spinning speed.
The maximum
allowable
spinning speed
varies with
programs.
Programs Guide
Cotton
For washing cotton fabrics
Memory
For storing user customized
washing settings
Synthetic For washing chemical fiber
fabrics
Wool
For washing wool fabrics
Silk
For washing silk fabrics
Heavy For sheets towels and
other fabrics washing
Underwear For cotton underwear
washing
Sport wash For washing cotton fabrics;
please use P & G’s Lander
softener; rinse only one
time, realizing water, time
and energy saving
Night For the clothes
made of cotton, linen and
chemical fiber fabrics, and
will be quieter.
Quick
For washing slightly dirty
fabrics, light clothes and
brand-new clothes
Spin
For spinning the clothes
Tub clean
For washing the washer’s
inner drum; please add a
small amount of washing
powder or detergent, but do
not put any clothes into the
washer
“Washing” time
“Spinning” time
“Strong ” button
“Delay” button
“Pre-wash” button
“Anti-crease” button
“Start/pause” button
Display screen
“Temperature” selection
“Speed” selection
“Auto” button
Program knob
• Select the
desired program
by turning this
knob.
• After turning on
the washer, it
automatically
selects the
program of last
washing.
• Press the “Power” button
to turn the power on.
Press this button again
and hold it for 2 seconds
to turn the power off.
• After turning the power
on, if any button is not
pressed within 5
minutes, the washer will
automatically shut down.
• Press “Strong ” button to increase the
washing time and times of rinsing during
the main washing stage of selected
program.
˄
This feature is applicable for
dirty clothes
˅
• The illuminated icon indicates the “strong”
function is selected.
• This additional function applies to “cotton”,
“memory”, “synthetic” ,“night washing”
“heavy”and “Sport wash” programs only.
• This button is effective before starting a
program.
The icon illuminates when the “delay”
function is selected
If the “delay” function is not
selected, this icon will illuminate
when the washer is turned on
Power-down memory
With the power-down memory function, the washer can
memorize the program’s running state in case of power failure
or loose plug during washing and continue the selected
program after resuming the power supply.
Child lock icon (simultaneously press and hold the “Delay” and “Start/pause” buttons for 3s, the child lock function will be activated to
avoid changing the selected program by inadvertent touch of buttons; simultaneously press and hold the two buttons for 3s again, this
function will be cancelled; in the child lock mode, the user needs to unlock manually after the washing program ends)
heating temperature
spinning speed
position of clothes
weight
Door lock icon (the icon illuminates when the door is closed)
Note
•
The time displayed on the display screen is only for reference and may be slightly different from the actual time.
•
The child lock function will be automatically removed when process ends or the plug unconnected.
main washing
time
times of rinsing
program
progress bar
remaining
spinning time
Numerical display zone (After turning the power on, the time of
last washing program is displayed in this zone; display various
preset codes, e.g. is displayed at the time of
trouble alarm)
• Press the “Delay” button and the illuminated icon indicates
that the “delay” function is selected. The delay time
(0.5-24h) increases by 30 minutes each press of “Delay”
button. The time will change continuously if you press and
hold this button until you release it.
• The delay time is the end time of washing. For example,
6:00 means the washing ends after 6 hours (the delay time
must be longer than the program’s running time).
• The “Delay” function is not available for “Spin” and
“Tub clean” programs.
•
Press the “Start/pause”
button, the washer will start
and the indicator light remains
on. If this button is pressed
when the washer is in
operation, the washer will
pause and the indicator light
will flash.
•
When power is on, but you do
not press "Start / Pause"
button to start the washi ng
machine, if it meets door open
condition,please press the
button for 2 seconds and the
door will be open.
• Press the “Prewash” button to select or cancel the prewash
program.
• The prewash program can be selected for washing heavily
soiled clothes.
• Press the “Prewash” button, the “Prewash” icon will illumin ate.
Press the “Prewash” again, the prewash function will be
cancelled and the “Pre-wash” icon will go out.
• When selecting the prewash function, add a proper amount of
detergent into the prewash box, otherwise do not add any
detergent into the prewash box.
• This additional function applies to “cotton”, “memory”, “synthetic”
and “Lander” programs only.
• Press "Anti-crease" button to startup/shutdown the
crease-resistant and soak function.
•When the process runs to the last rinse, the washing
machine is not going to drain, clothes will be soaked in
water, and the soak icon flashes, the remain time not
decreasing. If you need to dry the clothes, you can
press "Anti-crease" button or “start /pause”button,
then the icon will be off to cancel this function,
and the washing machine continue to work.
• This feature and the "Delay"button can not be chose at
the same time. Also this feature is only effective in the
“cotton”, “memory”, “synthetic”,“heavy” , “underwear”,
“Sport wash”, “night washing” process.
7. Display Screen
8. Other functions
9. Fault Clearance
Eccentric protection
When spinning, if the clothes are not evenly distributed, the washer will fluff
out and redistribute the clothes and continue spinning after the clothes
distribution becomes even. If the clothes distribution does not become
even within the specified time, the washer will not spin to avoid abnormal
vibration. In this case, please check the clothes for intertwist and
rearrange them, then select “spin” program to spin the clothes.
When there are few clothes, the washer may not spin due to
eccentric protection. In this case, you can put more clothes into the
washer and make them evenly distributed, then continue spinning.
In addition, it is normal that the program time will prolong for the
washer rearranges and fluffs out the clothes.
Silencing function
Select the self-clean program, simultaneously press and hold the
“Delay” and “Pre-wash” buttons for 3s to silence the beep of all the
programs (excluding the alarm sound), and the display screen will
display “BEEP OFF”.
Function
Function
Function
Function
Function
Function
Function
Function
Function
Simultaneously press and hold the “Delay” and “Pre-wash” buttons
for 3s to resume the beep of all the programs, and the display
screen will display “BEEP ON”.Note: The alarm sound in light
washing process p(not including the "Unb") can not be removed
Automatic closedown upon clean detected
Select a proper program and add a proper amount of washing
powder according to the quantity and degree of dirtiness of the
clothes to be washed, the washer can automatically adjust
washing time and times of rinsing to achieve the best washing
effect.
The following phenomena are not necessarily faults of the washer. Please check against the following table before call for servicing.
If any fault actually exists, please contact our After-sales Service Department and do not repair by yourself. Please pull out the power plug
before check.
State
Phenomenon
Solution
State
Phenomenon
Solution
Displayed code
Code meaning
Solution
er
of
e
B
n
oi
t
ar
e
p
o
n
e
h
W
g
ni
h
s
a
w
n
e
h
W
e
s
ni
r
n
e
h
W
ni
ar
d
sr
e
ht
O
g
ni
n
ni
p
s
n
e
h
W
h
s
a
w
n
e
h
W
There is a small amount of water
in the drain pipe and washer
when using for the first time
The washer does not operate
Buttons cannot be operated
Water leakage occurs at the
water tap
No water inflow or slow water
inflow
Water feeding and water
drainage occurs at the same
time
Abnormal noise
It is normal; the water is the remaining
water of factory inspection
Poor washing effect
Forceless washing
Stop operation during washing
Repeated rinsing but no spinning
No spinning
Loud noise when spinning
Vibration and displacement
The clothes are not spun dry after
finishing the spinning program
No water discharge or slow water
discharge
The control panel is partially hot
The washing does not end after
the preset delay time
•
Check whether power failure or abnormal
power supply occurs
•
Check whether the power plug is firmly
inserted into the socket
•
Check whether the fuse of power supply
or the current breaker is in good condition
•
Check whether the “power” switch is
pressed
•
Check whether the water tap is turned on
•
Check whether the “Start/pause” button
is pressed
•
Check whether the “child lock” function is
set
•
After starting, to select other programs,
please press the “Start/pause” button and
then operate
• Check whether the shape of water tap is suitable
• Check whether the water inlet pipe joint is
installed in place
• Check whether the water tap is damaged
• Check whether the highest point of drain pipe is
lower than 80cm
• Check whether the drain pipe orifice is immersed
in the water
• Check whether the washer inclines or
shakes
• Check whether there are foreign bodies
such as coins and zippers in the washer
• Check whether the noise is from the buttons
and zippers of articles
• Check whether the noise is from the
draining pump or motor in normal operation
• The clothes distribution becomes imbalanced
during washing
• Poor water feeding/drainage conditions result
in a longer time
• It is normal that electronic components are
slightly hot
• Check whether the drain pipe is bent, clogged
or frozen
• Check whether the highest point of drain pipe
is 100cm above the floor
• Check whether the filter is clogged
• The spinning effect varies with the type of
clothes
• Check whether it is for eccentric protection
with few clothes
• Check whether all the fixing bolts for
transport are removed
• Check whether the washer is level (the feet
can be adjusted to level the washer)
• Check whether the clothes intertwist
• Check whether the washer collides with
other objects
• Check whether there are foreign bodies in
the washer
• The washer’s program is set with water
discharge time and the spinning starts after
a period of time
• Check whether the clothes intertwist
• The washer with the function of automatic
closedown upon clean detected
automatically increase or decrease the
times of rinsing (1-2 times) according to the
degree of dirtiness of the clothes
• Check whether sudden power failure or
power supply cut-off occurs
• Check whether the “Start/pause” button is
pressed
• Check whether the clothes weight exceeds
the washer’s standard washing capacity
• Check whether the type and dosage of
detergent are suitable
• Check whether the selected program is
correct
Code for the clothes quantity; L-1
is displayed when there is less
than 1kg of clothes or no clothes
in the washer
Code for the clothes quantity; L-3
is displayed when there is about
3kg of clothes in the washer
Code for the clothes quantity; L-R
is displayed when the inner drum
is basically full
The whole program ends
Abnormal door locking or
unclosed door
Drainage fault
Temperature sensor faul
Heating fault
Abnormal water inflow
Close the door; if the problem
remains, please ask for repair
Clean the draining pump filter and
check whether the drain pipe is
clogged; if the problem remains,
please ask for repair
Please ask for repai
Please ask for repai
Please ask for repai
Please ask for repai
Shut down and remove the problem; if
the problem remains, please ask for
repair
The motor speed is higher or lower than
the pre-set speed
The motor stops running
The water level exceeds alarm level
Water level sensor fault
Shut down and remove the problem; if
the problem remains, please ask for
repair
Check whether the water tap is turned on,
whether the water pressure is too low,
whether power supply cut-off occurs; if the
problem remains, please ask for repair
• Check whether the water tap is turned on and
whether water supply cut-off occurs
• Check whether the water inlet valve is clogged
(if necessary, clean the valve)
• Check whether the water tap and water inlet
pipe are frozen
• Check whether the “delay” program is selected
• Check whether the “Start/pause” button is
pressed
• Check whether the water inlet pipe is bent
• Check whether the water pressure is too low
Take out and fluff out the clothes; if the
problem remains, please ask for repair
Uneven clothes distribution when
spinning
The clothes quantity is beyond the
acceptable range
Communication fault
Being inconsistent with the conditions for
door opening, it is not allowed to unlock
the door
Take out some clothes
Please ask for repair
Pull wire
Water inlet
valve joint
Notes
To add clothes during washing or want to
remove clothes due to extended power failure,
make sure that the water level in the drum is
properly below the lower edge of sight glass,
the water temperature is below 50
° C
and the
inner drum is not running, then remove the
drain pipe from its support and lower it until no
water is drained from the drain pipe, replace
the drain pipe. Open the filter door at the
bottom of the washer, and you will see a pull
wire. Take out the pull wire and gently pull it
downwards until you hear a low sound, the
door will open, now you can add or remove the
clothes. Afterwards, reset the pull wire and filter
door.
Frequently wash the water inlet pipe joint and
the filter screen of water inlet valve to prevent
them from being clogged by impurities.
This washer contains recoverable materials. Please properly dispose of them to
protect the environment.
Never perform the above operations when the washer is running.
Warm tips
10. Cleaning/Maintenance
Fig. 1
Filter
Waste pipe
Water container
Waste pipe plug
Fig. 2
Fig. 3
Fig. 6
Fig. 4
Fig. 5
Please unplug the power plug from the socket before
cleaning and maintenance.
To clean the filter (once a month as recommended)
(1) After draining the water in the washer, press down the filter door
using a flat head screwdriver or a similar tool through the square
hole above the filter door (as shown in Fig. 1).
(2) Hold the plastic pipe plug to pull out the waste pipe, prepare a
water container, remove the plastic plug of waste pipe to drain the
remaining water into the container (as shown in Fig. 2), replace
the plastic plug onto the waste pipe, and finally clamp the waste
pipe in original position.
(3) Anticlockwise screw out the filter. It is normal that a little water
flows out at this time (as shown in Fig. 3).
(4) Rinse with clean water (as shown in Fig. 4).
(5) Insert the filter after aligning the convex of filter with the groove of
draining pipe, then clockwise tighten it (as shown in Fig. 5), and
finally close the filter door.
Notes
Notes
After finishing washing, please turn off the water tap and remove the water
inlet pipe
Unplug the power plug and put the drain pipe in place
If the washer is not to be used for a long time, please keep the door slightly
open and dry the window pad to avoid unpleasant smell
Do not use organic solvent or corrosive liquid on the washer’s exterior and
rubber parts
To clean a distributor box, pull it out,
gently press it down and continue to
pull it out (as shown in Fig. 6),
remove it, rinse it with water and
reinstall it in place.
The filter must be tightened to
avoid water leakage.
The machine has automatic weighing func tion. Press the "Power" button to get the power on, then the door will automatically pop
open, so put clothes in, close the door, and the display screen will be ready. Press the "Start / Pause" button, about 2 minutes later
weighing will be finished and the machine will automatically calculate the best washing process. This can save a lot of water. If you
don’t need the automatic weighing, you can press “AUTO shift” button to switch to the gear of manually selecting the amount of
clothing (screen display shows L-1 - L-A). When gear is set up, the washing machine will adjust the water, heating and washing
time and so on in accordance with the set gears to save water, time and power.
(1) D "L-1"-"L-A" correspond to the amount of clothing in barrel of 1-7, in the manual selection, when the barrel has a lot of
clothes (more than one half), please select "L-6 " or "L-A". if the barrel of clothing is relatively few (less than one half),
please select one in "L-1", L-2", "L-3", "L-4" and " L-5"
(2) Please adjust the dosage of washing powder in accordance with the gears show on screen.
Cancel or re-select process during the washing
(1) Shutdown the machine to cancel the running
process;and then boot it to re-select the procedure.
(2) If you need to select additional function when the
process is running, press "Start / Pause" button, then
select the additional function you want, at last re-press
the "Start / Pause" button to continue the running.
The above operation should be under the
status of child lock non-started.
This function is not available in the following programs or situations:
(1)
The
programs except
“cotton” and “synthetic”
program
(2) The program where the total time of washing and heating is
less than 20min;
(3) Change main washing time or times of rinsing;
Memory program
Select the “memory” program and set various washing parameters,
all the washing settings will be stored after the washing program
ends. When the user want to wash with the same settings, just
select the “memory” program after turning on the washer. (This
program does not memorize the set “delay” and “
Anti-crease
” functions.)
Musical alert tone for washing over
The washing machine is equipped with a musical alert tone
to prompt you the washing over when the whole washing
process has ended. While enjoying the music, you can
open the machine door to take out the clothing (Non-music
style washing in night).
Separate the color-faded clothes from the others when washing a bunch of
clothes.
The weight of washing clothes should not exceed the maximum capacity of the
washing machine.
Specific dirty laundry should be pre-washed first, and then put them together with
others to wash.
For those not too dirty clothes, it may be appropriate to reduce the dosage of
detergent and choose the choice of faster washing procedure.
Add fabric softener to make clothes soft and easy for ironing, also to remove
electrostatic bonding.
Choose the right temperature: It is recommended to select the above 60 ° C heating
temperature for dirty clothes washing but not for the others .
Appropriate use of detergents,excessive use will reduce the rinse effect .
The washing machine is made of some recyclable materials, please correctly
handle with the waste when discard it and to protect the environment.
Note
Note
Notes
displayed
ˈ
the machine is draining at the same time
ˈ
it ‘s normal.