1
2
3
4
6
5
7
8
9
Haier Automatic Drum Washer
Operating Instructions
Models:
Please read these instructions carefully before use.
Please save these instructions for future reference.
Specifications
53dB (A weighted)
71dB (A weighted)
Grade 1
1,400 rpm
Power supply
Water inlet pressure
Rated washing capacity
Rated spinning capacity
Spinning speed
Washing noise
Spinning noise
Energy efficiency rating
Dimensions (H×D×W)
Applicable standard: GB/T 4288-2008 Household and Similar Electrical
Washing Machine.
The diagrams in this manual are for illustrative purpose only. Due to
continuous product improvement, please see the actual product for the
appearance, color and accessories which may be inconsistent with those
described in this manual. Here we apologize for this.
This product is classified as Class I appliance. Please pay attention to
electrical safety during use.
Certificate of Quality
Inspector:
Haier Group
Qingdao Haier Drum Washer Co., Ltd.
Address: Haier Industrial Park, Qingdao Hi-tech
Industrial Development Zone
Tel: 4006 999 999
Fax: 0532-87636565
Postal code: 266101
Website: www.haier.com
Customer service e-mail: [email protected]
Headquarters address: No. 609, 308 National
Highway, Qingdao
Version: 1st version, 2009
Special No.: 0020505574A
V98497
Contents
1. Notice before Use
2. Safety
Precautions
3. Precautions for Use
4. Preparations
before
Washing
5. Operational
Procedure
6. Control Panel and
Program Description
7. Display
Screen
Description
8. Other
Functions
9. Fault
Clearance
10. Cleaning/Maintenance
Technology of automatic closedown upon
clean detected
Real-time door open
Automation technology
Crease-resistant and soak function
Technology of anti-bacteria and
mildew-proof with window pad
Self-cleaning function
Foam self-checking function
Power-off memory function
Technology of variable frequency drive
When selecting the pre-wash function or the
pre-wash program, add detergent into the
pre-washing chamber to pre-wash the clothes;
As for the dosage of detergent, please refer to the
instructions for detergent. Excessive detergent
may result in too many bubbles and spill as well
as affect its dissolution. Special low foaming
detergent for drum washers shall be used. When
washing synthetic or wool fabrics, be sure to use
special detergent;
Do not allow the level of softener or liquid
detergent to exceed the “MAX” mark of distributor
box. Concentrated softener or liquid detergent
should be diluted before being added into
distributor box. Excessive softener may damage
the synthetic fiber. As for the dosage of softener,
please refer to its instructions.
Check the clothes for special washing
requirements and make sure that the clothes
are suitable for washing with washing machine
and water in order to avoid the deformation
and damage of the clothes.
For the clothes tainted with much
mud and dust, please remove
them before washing.
Wash those clothes liable to color fading
separately from other clothes.
Tie the ties, buckle the buttons, zip the
zippers and sew the openings.
To avoid the sound from
buttons, please turn those
clothes with buttons inside out
before putting them into the
washer.
Please unfold and fluff out the clothes before
putting them into the washer. Furthermore,
do not overload the washer.
When washing small articles (e.g.
handkerchief, gloves, socks, etc.) and those
clothes liable to intertwist and wear, please
put them into net bags for washing, rinsing
and spinning to prevent them from falling into
between the inner drum and window pad and
further avoid incomplete washing or damage
to top-grade clothes. The weight of articles in
each net bag should not exceed 300g and
the net bags should not be washed together
with those clothes not in a net bag, otherwise
the washer will not be balanced, resulting in
abnormal vibration.
Reference weights for small articles:
handkerchief: about 30g/piece; gloves:
about 60g/pair; cotton socks: about
30g/pair; silk socks: about 20g/pair.
Check pockets and remove
coins, sand, hairpin and other
things from them.
According to the max washing capacity specified in A.4 of
Appendix A to the standard GB/T4288-2008.
For energy efficiency test program, please select “
60°C + strong wash + max washing ca max speed”.
1.
The plug should be accessible after the washer is
installed in place. Do not disconnect the plug
from the socket by pulling the power cord. If the
power cord needs to be replaced, ask a qualified
person or contact our After-sales Service
Department for replacement. Prevent the power
cord from being pressed by any foot and from
such problems as break-off, flattening, etc.
2.
Power supply must use an independent socket,
the grounding terminal of which must be properly
grounded. The socket must be a qualified product
with the following 3C certification mark:
3.
Such overload protective devices as suitable fuse must be available
at the user’s home. And, the ammeter, wire and socket must be able
to withstand 10A current.
1.
Keep the washer away from any heat source and direct sunlight to prevent
the aging of plastic and rubber parts.
2.
The washer’s door is relatively hot during heating. For the purpose of safety,
keep the children away from the washer. In addition, when draining hot water,
be careful to avoid scald.
3.
After unpacking the washer, do not allow the children to play with the
disassembled packaging materials such as carton, plastic packaging bag and
foam, etc.
4.
Do not install the washer outdoors and in excessively humid environment,
otherwise moisture on the electrical components may easily cause damage to
the ignition system or other accidents. In case of inadvertent water spray onto
or into the washer, only after the washer is thoroughly dried can you use it.
5.
Neither place the washer directly onto the airproof carpet nor close up to the
wall or furniture to avoid accidents. The carpet must not block the bottom vent.
Do not use the washer on any platform higher than the floor, otherwise it may
fall off onto the floor and be damaged.
1.
Do not use such chemicals as flammable detergent and
dry-cleaning solvent to wash the clothes. Do not use any
organic solvent or corrosive liquid to wipe the exterior and
rubber parts of the washer. Do not use any flammable spray
1.
Due to the fluctuation of water pressure, please check all the joints of water inlet
pipe, water tap and drain pipe for firm connection before washing every time. In
case of loose water pipe connection or water leakage, please turn off the water
tap and take proper measures or contact our After-sales Service Department for
reconnection. Only after such faults are cleared can you use it again.
2.
When the washer is not in use, please keep the door slightly open to avoid
unpleasant smell. Do not cover the washer with a plastic bag to avoid moisture
staying in the washer.
3.
Do not place any heavy object, heat-producing appliance and item liable to
water/liquid leakage to avoid the deformation of table top and plastic parts.
4.
Do not wash such waterproof articles as raincoat, bicycle cover and down
products as well as carpet to avoid abnormal vibration or the damage to articles.
5.
Do not open any detergent distributor box during the program operation to avoid
some detergent leaving in the box.
6.
If a brassiere with steel wire is washed in the washer, the steel wire may bounce
out. Therefore, do not wash any brassiere with steel wire in order to protect the
washer.
7.
The washer’s door is equipped with self-lock safety device. Only when the
washer is in safe state (the water level is below the lower edge of sight glass,
the temperature inside of the drum is 50°C, the inner drum is not rotating) can
you unlock the door. Never forcibly open the door before the washer reaches
the safe state to avoid damage to the door or scald. “Click” will be heard when
opening the door. It is normal and arises from the working principle of
electromagnetic lock’s internal structure.
8.
Turn off the water supply and power supply after finishing washing every time.
Moreover, clean the sight glass window pad interlining to prevent contaminants
from tainting the clothes again.
9.
It is recommended that the washer be installed in a location with floor drainer.
10. Using the washer in the environment with the temperature at 0°C or below 0°C
may damage the water inlet valve and drainage system. If the washer is stored
in the environment with the temperature at 0°C or below 0°C, be sure to move
and leave it in the environment at room temperature for 2-4 hours before use.
11. Do not put the clothes tainted with chemicals into the washer.
12. Washing, drying capacity
near the washer. In case of flammable gas leakage, do not plug or unplug the
washer’s power plug. Do not use the washer near the environment with
flammable and explosive gas & liquid such as biomass pool, etc.
1. Notice before Use
2. Safety Precautions
5. Operational Procedure
3. Precautions
for Use
4. Preparations
before Washing
Please install and adjust the washer
according to the instructions in this manual
so that you can use it in a safer manner.
To connect the water inlet pipe
1. Select a proper water tap
Distributor boxes
2. Remove the water inlet pipe joint
The length of front end must be more than 10mm. In
case of unsmooth end face of the water tap outlet,
please file it smooth to avoid water leakage.
ķ
Press the lower end of locking
lever;
ĸ
Hold the water inlet pipe, press
down the slider and remove
the water inlet pipe joint;
Ĺ
Remove the nameplate.
4. Connect the water inlet pipe
5. Connect to the washer
6. Check the water inlet pipe for
good connection
To paste the felt and install
the Noise Reduction Board
Drain pipe
To adjust
the feet
Accessories
ķ
Press down the slider and insert the water
pipe into the water inlet pipe joint;
ĸ
Hook the water inlet pipe joint with the
locking lever, then loosen the slider until a
“poop” is heard.
ķ
Ring the nut at the other end of water inlet
pipe onto the water inlet valve joint;
ĸ
Tighten and confirm the nut of water inlet
pipe in place.
ķ
Check for firm connection;
ĸ
After installation, turn on the water tap and
check for water leakage;
Ĺ
Before every use of washer, please check
for good connection between the water inlet
pipe and the water tap;
ĺ
Never forcibly bend the water inlet pipe.
1. Paste the felt on one side of the Noise
Reduction Board.
2. Incline the washer backwards and remove the
four feet (Fig. 1);
3. Place the side with felt of splash plate
inwards, install the foot bolts through the four
holes on the shell and tighten them (Fig. 2),
then level the washer.
The outlet end of drain pipe must be
higher than 80cm and the highest point
must be less than 100cm. To prevent the
drain pipe from coming off, you may
secure it to its clamp at the back of
washer or to the firm support as shown
in the figure.
It is not recommended to extend the
drain pipe. If the extended pipe exceeds
2.5m in length, water feeding and
drainage may easily occur at the same
time. Please contact our After-sales
Service Department for extending the
drain pipe.
(Add a proper amount of
detergent required by washing)
Pre-washing detergent box
Washing detergent box
Softener and bleacher box
Be sure to
adjust the
four feet to
level the
washer
before use.
Water inlet pipe assy
Noise Reduction
Board
Drain pipe support
Operating
Instructions
Warm Tips Card
Felt
After finishing the adjustment of
the four feet, turn the foot
support nut to cling to the shell
in order to support the washer.
Note
Note
3. Install the water inlet
pipe joint
ķ
Loosen the nut to the extent that approximate
3-4 turns of screw thread are exposed;
ĸ
Loosen four screws of the water inlet pipe
joint to the extent that the joint can be ringed
onto the water tap;
Ĺ
If the water inlet pipe joint cannot be ringed
onto the water tap, please remove the
bushing and install again;
ĺ
Turn one of screws to an approximately
proper position in advance, ring the water
inlet pipe joint onto the water tap, then evenly
tighten the remaining three screws in place,
and finally tighten the nut.
Water inlet
pipe joint
Locking
lever
Locking
lever
Slider
Water inlet pipe
Wall
If the water tap is
placed against the
wall, you may turn
this screw to a proper
position in advance.
Bushing
3-4 turns
Nameplate
Nut
Fig. 1
Fig. 2
Table top
Drain pipe
support
Main control
panel
front board
Inner drum
Window pad
Type of clothes
Fadeless cotton fabric
Terylen
fabric/blend
fabric/chemical
fiber fabric
Wool fabric
2kg
2kg
8.5kg
4kg
HW85-B1486NZP
Silk fabric
Door
Sight glass
Bottom trim
Filter door
Foot
Electrical safety
prompt: Please pay
attention to electrical
safety when using
the washer.
Warning sign: The
contents with this
sign involve the
safety of both the
product and user. Be
sure to strictly follow
these instructions,
otherwise the
washer may be
damaged or the user
may be injured.
Prohibitory sign: The
contents with this
sign indicate the
behaviors to be
absolutely
prohibited. Failure to
follow these
instructions may
result in damage to
the washer or
personal injury.
Connect the
water inlet
pipe, turn on
the water tap
Place the
drain pipe
Insert the power
plug into the
power socket
Turn on
the power
switch
Select the
desired program
Select washing time, times of rinsing,
spinning speed, strong wash, pre-wash ,
etc. as required.
“Delay” program is off by default.
To activate this program, press
“Delay” button to make settings.
Start the
selected
program.
(Refer to “Distributor Boxes” in “Notice before
Use” section for details.)
Open the door, put the clothes into the
washer, close the door, then add a proper
amount of detergent into the distributor
box and close the distributor box.
After finishing washing, the washer will
automatically switch off.
Haier Automatic Drum Washer
Operating Instructions
Models:
Please read these instructions carefully before use.
Please save these instructions for future reference.
This product is only for sale in Mainland China.
Contents
1. Notice before Use
2. Safety
Precautions
3. Precautions for Use
4. Preparations
before
Washing
5. Operational
Procedure
6. Control Panel and
Program Description
7. Display
Screen
Description
8. Other
Functions
9. Fault
Clearance
10. Cleaning/Maintenance
11. Warranty Instructions
Technology of automatic closedown upon
clean detected
Real-time door open
Automation technology
Crease-resistant and soak function
Technology of anti-bacteria and
mildew-proof with window pad
Self-cleaning function
Foam self-checking function
Power-off memory function
Technology of variable frequency drive
HW85-B1486NZP
Table top
Water inlet valve
Power cord
Screw (4 pcs)
Power plug
Back cover plate
Drain pipe clamp
Drain pipe
Splash-proof plastic
plug (4 pcs)
Shell
Packaging bolts and accessories
Packaging bolts and accessories are used to fix
internal components of the washer during transport
and should be removed before using the washer.
Unscrew packaging bolts and take out
the back-up block.
Block the bolt hole with a splash-proof
plastic plug.
Please keep such disassembled components as
packaging bolt and back-up block in a safe place for
future handling of the washer.
+:%1=3
850mmX650mmX595mm
0.001
Anti-crease
Prewash
Delay
Strong
Wash
Rinse
Spin
Temp.
Speed
Auto
Start/Pause
Power
Heavy
Underwear
Sport wash
Night
Quick
Spin
Tub Clean
Wash
Rinse
Spin
Temp.
Speed
Auto
Silk
Wool
Synthetic
Memory
Cotton
Anti-crease
Prewash
Delay
Strong
Start / Pause
Press and hold 2seconds
to set door unlocked
HW85-B1486NZP
8.5kg