Haier HW80-B14979, Service Manual, Page: 26 / 42

Front Load Washing Machine
Error message:The required water level is not reached within 8 min.
N
Draw out the dispenser and check if
water is entering
N
Check t he terminals of
electromagnetic
valve by Electromagnetic valve must be broken, please
replace it.
The wire connected PCB and inlet valve is not
properly. Please reconnect it or replace it.
Y
Y
Y
Check if the import voltage of
electromagnetic valve is blocked by dirt. Y
Replace PC B
Check if export voltage from PCB to
electromagnetic valve, is it between AC
220-240V?
N
N
Clean it right now.
Observe if the height of drain pipe not reach 80
cm.If water level sensor and the hose is leaking
gas.
Y
Y
Cut
Check if clothing winding cause the motor
can not normal operation.
off power and check if motor wires
are connected well
Y
Cut off power and check arbitrary two
multimeter,
N
N
N
The motor is broken, replace it.
Replace the motor drive PCB.
Sorting clothing,and operate it again
Reconnect well
979
26