Haier HW80-B1286, Service Manual

Page: 11 / 25

SERVICE MANUAL
HW80-B1486/HW80-B1286
6-2 Self check
Front Load Washing Machine
1. How to start
Press the "Intense" and Prewas but ton, the nplug on the machine," tESt"will be displayed by tur
Press Start/Pause but ton , the mode l of the machine wi ll be displayed( suchas 1480).Pres
button again,the machine will start a self test program, then the following will be performed.
2. Test item
1) When the door switch is closed for three seconds, 88: 88 w ill be displayed. Other wise"Err1"will be displaye
2) when the main wash valve allows water to let in for 5 seconds, when the prewash valve allows water to let in for
5 seconds, when the intenerate valve allows water to let in for 5 seconds, come into next water level, 77: 77 wil
be displayed, If the water can not reach the level in 2 minutes," Err5 " will be displayed. If the water exceeds the
overflow level, " Err8 " will also be displayed.
3) When the washing machine heats water for 10 seconds, 66:66 will be displayed
4) When the washing machine drains for 2 minutes, if no water left , 55: 55 will be displayed
Otherwise " Err2 " will be displayed.
5) When the inner drum runs for ten seconds with the speed of 90 rpm at this time and for thirty seconds with the
speeds of 800rpm 44:44 will be displayed.
6) When the self check program is completed, "End" will be displayed.
6-3. Model selection
When the display board (on the control panel) is replaced technician need to select the correct model according with
the model name on the washing machine.
1 Press the Rinse button and then plug on the machinet the same time,Then 1480 " will be displayed ont he screen
2 Press the Speed button to choose correct speed
1680-1480--1470-1460-1280-1270-1260--1080-1070-1060 will be displayed by turn.
Then press the Temp. buttont save
For this model HW80- B1486/HW80-B1286 please choos
3 If you want to change the model again after storage, you can cut off the NTC and do the cycle adjustment.
11
6
6
s
l
Start/Pause
1480 1280