6
In
on
Dismantle the transport
●
on bolts
The transpo
on b
●
olts are designed for clamping an -
vib
on components inside of the washing machine during
the transpo
on process.
Remove
●
the back cover.
Remove the four bolts on the rear side and take out
Replace
●
the back cover.
Fill the holes le by the bolts with blanking plugs.
Note:
When you repla
●
ce the back cover, the convex
must face to outside, and you have to insert the
back cover from the two gaps as sho
Keep the transporta on bo
stabilizers in a safe place for later use.
Adjus ng the feet and locking nut
There are adjustable feet under the bo om of the washing machine. Before
use, they should be adjusted so that the machine is level. This will minimize
vibr
ons and thus noise during use. It will also reduce wear and tear. We
recommend to use a spirit level for adjustment.Floor should be as stable and
Before Use
machine
îò
ïò
upright.
1.
2.
3.
keep the
2.
2
.
Summary of Contents for HW70-IM10829TNZP
Page 2: ......