Haier HW70-14F2B, User Manual

Page: 71 / 82

71
(**) See the chapter regarding installation of your machine.
Unsatisfactory
washing result.
As soon as the ma-
chine is loaded with
water, water dis-
charges.
No water appears
in the drum during
washing.
Laundries have
detergent residues
on them.
Grey spots appear
on the laundries.
Water being hard.
( Contaminated, lime
water etc.)
laundry distributed in
your machine non-
homogenously.
The end of water
discharging hose
is too low for the
machine.
No fault. Water is
in the unseen part
of the drum.
Non-dissolving
particles of some
detergents may
stick to your
laundry as white
spots.
The reason for such
spots may be oil,
cream or ointment.
Adjust the amount of
detergent based on the
instruction of detergent
manufacturer.
Spread your laun-
dries in the ma-
chine properly and
homogeneously.
Set the water dis-
charging hose on ap-
propriate height. (**)
Perform an extra
rinsing by setting your
machine to “Rinsing”
programme, or clean
the spots using a
brush after your laun-
dries dry.
Apply the maximum
amount of detergent
instructed by the deter-
gent manufacturer in the
next washing operation.
CHAPTER -9: TROUBLESHOOTING
FAULT
POSSIBLE
CAUSE
TROUBLE-
SHOOTING