Haier HW65-10829TNZP, User Manual, Page: 19 / 24

17
Moving the machine
●
Remove the back
●
cover.
Remove the blanking plugs.
Tighten the bolts with a spanner.
Replace the back cover.
Long periods of disuse
Display Codes
●
Maintenance
Codes Causes
E2 Door i
●
s not properly shut.
Shut the door properly, and then press the
F3 Temperature sensor not properly
connected or damaged. Contact the maintenance personnel.
F4 Heater
●
error (Appears at the end of a
cycle).
Contact the maintenance personnel.
E4 Water level not met in 30 minutes.
The height of the drain hose is below 80
cm.
The drain hose is in water.
Make sure that tap is turned on, and water
pressure is normal.
Install drain hose within 80-100 cm of
height.
Make sure the drain hose is not in water.
E1
6 minutes.
lter and check the drain hose
the maintenance personnel.
maintenance personnel.
Check drain hose for proper
To prevent blockage of water supply by solid substanc-
supply.
Unscrew the water inlet hose at the back (Fig. 1 ).
ush them with water and
a brush (Fig. 2).
1 2