Haier HW-F1260TVE, User Manual, Page: 9 / 10

F Strong Wash Button
H Wash Time Key
I Temperture Selection Key
J Rinse Key
K Speed Selection Key
M Load Key
N LCD
O Detergent Distribution Box
L Spin Key
G Program Selector
Press the key and select the rinse time,it changes for each press. Please see Program
Guide
Press the key and the light in the key will illuminate.This function may add the washing
time and spin time and rinse time ,it can be selected when washing dirty clothes.This
feature is unavailable in some programs. Please see Program Guide.
By turning this knob, it is possible to select the desired program.Refer to Program Guide
Press the key and select the wash time,it adds 5 minitues for each press.Please see
Program Guide.
Press the key and LCD will display the selected heating temperature(--,30,40,50,60,90 C),
which is adjustable as needed.
Note: -- means cold water washing and not heat up.
。
Press the key and LCD will display the selected spin-dry revolution
speed(0,400,600,800,1000,1200rpm).which is adjustable as needed. (When NO Spin-dry
feature is selected,the time will decrease correspongingly.)
Press the key and select the spin time, it change according to the speed. Please see
Program Guide
。
Turn the Program selector to select the desired program (see Program Guide .) Press the
key and manually select different program and power-saving and water-saving feature
based on the volume of load. The LCD display screen indicates the selected load L-1~L-A.
Note:The load selection depends on the selected program.L-1~L-A maximum five load
selections are related to the volume of the laundry. While the laundry volume is larger than
the half tub volume, recommend to select L-4~L-A where applicable ; While the laundry
volume is smaller than the half tub volume, recommend to select L-1~L-3 where
applicable.
LCD is a window to display information including washing status, washing progress,
reservation time, remaining time, heating temperature, spin-dry speed, load selection and
error as well as well as to display addition all features such as power clean,super clean
rinse and foaming check ect.
2) Do not add liquid detergent to compartment 1 and 2. If you are using liquid detergent,
then it should be placed inside the dosing device supplied by the detergent
3