Haier HVF160WH2, Installation Instructions And User Manual

Page: 8 / 12

English
8
BEFORE USE
The freezer should be placed on a flat and solid surface.If the appliance is placed on a
pedestal, flat strong and fire resistant materials must be used. Never use the foam packing
material as a pedestal. If the freezer by turning them clockwise or counterclockwise to
increase or decrease the height of the freezer. Do not pace the freezer in direct sunlight or
in a place where it is exposed to external heating source, this will ensure the optimum
performance of the Freezer. Install the appliance in a well ventilated place and a space of at
least 100mm must be kept above the freezer 20mm space on each side, and 50mm behind
the freezer.
Never place the freezer in a damp area or location where it may be splashed with water.
Clean and dry water splashes and stains with soft cloth immediately to prevent rust.
Do not place the freezer where the temperatures is too low(under 5
℃
). Do not operate freezer
outside.
Preparation prior to use
Remove all package parts, the foam base and the adhesive tape fixing accessories.
Place the freezer in location (please refer to Placing Environment).
Clean the inside and outside of the freezer before use(please refer to Defrosting and Cleaning)
After the appliance has been leveled and cleaned, let it stand for 10-30 minutes before switching
it on.
Opeartion Your Freezer
1. Remove all package parts, Place the freezer in location (please refer to Placing Enviroment).
2. Clean the freezer, Clean the inside and outside of the freezer before use (please refer to
Defrosting and Cleaning).
3. After the appliance has been leveled and before switching on let it stand for at least 30
mintues before switching it on so as to ensure refrigerant oil has settled.
4. Insert the plug in the socket and switch the freezer on, when the freezer is running the
sides of the cabinet may feel warm. Before loading food allow the appliance to run empty
for 6 hours to allow the compartment to cool.
Note: Do not block off vents inside the freezer and leave space around items stored in the
freezer as this will allow the freezer to freeze items quicker and allow the freezer to
operate more efficiently.
Environment