Haier HTW5618DNMG, User Manual

Page: 6 / 482

4
1-Safety information
GB
1-Safet y inform ati on
Before switching on the appliance for the first time, please read the following
safety warnings!
Warning!
Before first use
• Make sure there is no transport damage.
• Remove all packaging and keep them out of children’s reach.
• Wait at least two hours before installing the appliance in order to ensure the
refrigerant circuit is fully efficient. Handle the appliance always with at least
two people because it is heavy.
Installation
• The appliance should be placed in a well-ventilated place. Ensure an empty
space of at least 20 cm above and 10 cm around the appliance.
• Never place the appliance in a damp area or location where it might be
splashed with water. Clean and dry water splashes and stains with a soft
clean cloth.
• Do not install or place the appliance under direct sunlight or near heat
sources (e.g. stoves, heaters).
• Install and place the appliance in an area suitable for its size and use.
• Keep ventilation openings in the appliance or in the in-built structure clear of
obstruction.
• Make sure that the electrical information on the rating plate agrees with the
power supply. If it does not, please contact an electrician.
• The appliance is operated by a 220-240 VAC/50 Hz power supply. Abnormal
voltage fluctuation may cause the appliance failing to start, or damage the
temperature controller or compressor, or there may be abnormal noise while
operating. In such cases, an automatic voltage regulator shall be mounted.
• Use a separate earthed socket for the power supply which is easily
accessible. The appliance must be earthed.
• Only for UK: The appliance’s power cable is fitted with 3-cord (grounding)
plug that fits a standard 3-cord (grounded) socket. Never cut off or dismount
the third pin (grounding). After the appliance is installed, the plug should be
accessible.
• Do not use multi-plug adapters and extension cables.
• Ensure that the power cable is not trapped by the refrigerator. Do not step
on the power cable.
• Do not damage the refrigerant circuit.
• Do not locate multiple portable socket-outlets or portable power supplies at
the rear of the appliance.