6
Install the water intake hose
Insert the water intake hose
into the water-inlet entrance
on the control panel.
Water intake hose
Water inlet
Change the direction of the drain hoses
Add water as necessary.
2.Install the drain hose
Drain valve parts
The drain hoses in the wash tub when out off factory ,before use the machine,
please screw the drain hose on the drain valve parts , make sure the drain hose
fixing as necessary.
1.Remove the cover
Install the bottom foot
(HTW130-186S only)
1. Tilt the washing machine slightly from the front of the machine, and install
the Bottom feet with the three mounting pores on the front of the base.
Make sure that the foot buckles be installed in place. (Figure 1)
2. Tilt the washing machine slightly from the back of the machine, and install
the Bottom feet with the two mounting pores on the back of the base.
Make sure that the foot buckles be installed in place. (Figure 2)
Bottom foot
Bottom foot
Figure 1
Figure 2