Start Up
Follow the steps below to get your TV connected and ready for
watching.
7
English
1. Plug in Your TV — Plug the power
cord into the 2-prong outlet.
2. Hook Up Your TV — Connect the
cable or antenna to the provided
connection on the back of the TV.
Note:
The TV antenna or cable wire
is not included with the television set.
You need to purchase an antenna if
you are not going to hook up cable
service. If you already have a cable
service, connect the existing cable
wire that your local cable company
provided at the time of your cable
installation.
3. Put Batteries in the Remote
Control
— Place 2 AAA sized
batteries (batteries supplied) into the
remote control compartment by
matching the (+) and (–) ends of each
battery.
4. Turn on the TV
—
Press the
power button on the TV set or
remote control.
5. Place All Available Channels
in Memory
— Press the menu
button 5 times, for the Preset menu.
By selecting "Auto Search", it will set
up all available channels into the
memory. If you want to add or delete
channels from memory, do so by
going into "Add/Delete" mode.
(Refer to the Preset menu on p.32)
6. Set the Time — To set the time, go
to the Clock menu by pressing the
menu button 4 times. Follow the
instructions. (Refer to Clock menu on
p.30)
batteries
MUTE
SLEEP
RECALL
RATING
CH+
CH-
VOL+
VOL-
POWER
power button
Installation Instructions
