Haier HTF-540DGG7, User Manual, Page: 16 / 376

Use
EN
The indoor temperatures are influenced by the follow -
ing factors:
▶
Ambient temperature
▶
Frequency of door opening
▶
Amount of stored foods
▶
Installation of the appliance
Select the working mode
You may need to select one of the following two ways to set the appliance:
1) Auto Set mode
Under Auto Set mode, the appliance can automatically adjust the temperature setting ac -
cording to the ambient temperature and temperature change in the appliance. If you do
not have any special requirements, we recommend that you use Auto Set mode (refer to
Auto Set mode later on).
2) Manual adjusting mode:
If you want to manually adjust the temperature of the appliance in order to store a par -
ticular food, you can set the temperature via a temperature adjusting button (refer to
ADJUST THE TEMPERATURE).
14
Adjust the temperature for fridge
1. Unlock the panel by pressing button “F” if it is
locked.
2. Press button „A“ (Fridge) for select the fridge com -
partment. An alarm sounds. The actual tempera -
ture in the refrigerator compartment is displayed.
3. Press button “A” to set the fridge tempera -
ture. A signal will sound at each key press.
The temperature increases in sequences of 1°C
from a minimum of 1°C (OF) to a maximum of
9°C, switching to 1°C again when pressing further.
The optimum temperature in the refrigerator is
5 °C. Colder temperatures mean unnecessary
energy consumption.
If no key is operated in 5 sec., the setting confirms au -
tomatically.
Door opening alarm
When the refrigerator door is opened for more than 1
minute, the door opening alarm will sound. The alarm
can be silenced by either closing the door or touching
the control panel. If the door is left open for more than
7 minutes, the light inside the compartment and con -
trol panel illumination will automatically switch off.
Adjust the temperature
1. 2.
3.
Fridge
Fridge