Haier HSW59F18EIMM, User Manual

Page: 34 / 726

34
Installation
EN
Installation
Unpacking
WARNING!
►
The appliance is heavy. Always handle with at least two persons.
►
Keep all packaging materials out of children's reach and dispose them in an
environmentally friendly manner
►
Take the appliance out of the packaging.
►
Remove all packaging materials.
Environmental conditions
The room temperature should always be between 10° C and 43° C, since it can
influence the temperature inside the appliance and its energy consumption. Do not
install the appliance near other heat-emitting appliances (ovens, refrigerators)
witnout isolation.
Space requirement
Required space when door is opened:
W1 = 1221 mm
W2=1534 mm
D1=560 mm
D2=1040 mm
Ventilaton cross-section
To achieve sufficient ventilation of the appliance
for safety reasons, the information of the
required ventilation cross sections must be
observed.
Aigning the appliance
The appliance should be placed on a flat and
solid surface.
1. Tilt the refrigerator slightly backwards.
2. Set the feet to the desired level.
Make sure the distance to the wall on the hinge
side is at least 100 mm for the door to open
properly.
NOTICE
For a free standing appliance: this refrigerating appliance is not intended to be used
as a built-in appliance
10cm
10cm
10cm
max 45°