background image

When the remote controller is manipulated, it gets the system back to the
 normal operation mode.

Emergency and Test  Operation

Operation

 When machine is running in emergency, the set value of temperature and wind
speed couldn't be altered; meanwhile, it can't operate for dehumidifying or under
timing mode.

Emergency operation:

  Use this operation only when the remote controller
  is defective or lost.

When the emergency operation switch is
pressed,the" Pi "sound is heard once, which means
the start of this operation.

In this operation, the system automatically selects
the operation modes, cooling or heating, according
to the room temperature.

Test operation:

Test operation switch is the same as emergency switch.

Use this switch in the test operation when the room
temperature is below 16

O

C, do not use it in the normal

operation.

 Continue to press the test operation switch for more
  than 5 seconds. After you hear the "Pi" sound twice,
  release your finger from the switch: the cooling operation
  starts with the air flow speed "Hi".

Removal of the restriction of emergency or test operation

 Press the emergency operation switch once more, or manipulate through the
 remote controller; the "Pi" sound, the emergency or test operation is terminated.

20

Summary of Contents for HSU-18HSA03




























Reviews: