Haier HSR3918FI Series, User Manual

Page: 39 / 232

EN
10-Installation
35
10.5-6
1. Cut the pipe into two pieces with the required
(B1) and the water tap (B2) (Fig. 10.5-1). Make sure
to get a square cut by using a sharp knife.
2. Insert pipe (B1) approx. 12 mm deep into the
3. Secure the pipe with a locking clip (C) according to
Fig. 10.5-3.
4. Repeat step 2 and 3 with the pipe (B2) on the other
5. Connect the end of pipe (B2) to one of the adapters
“D” or “E and F” which suits to the water main (Fig.
10.5-4).
6.
Connect the end of B1 to the valve at the back of
the appliance (Fig. 10.5-6).
7.
Open the water tab to check if the system is leak
B1
B2
A
1/2“
3/2“
D
E
F
10.5-1
ArtNo.601-0010 - S xS 661-9 - Pipe to filter
A
B1
10.5-2
ArtNo.601-0005 - S xS 661-9 - S ecuring the p
B1
A
C
10.5-3
3/4“ 1/2“
E
F
B2
D
10.5-4
WARNING!
10.5-5
8.
Remove the plug in the valve at the back of appliance
(Fig.10.5-5).
Ensure that the connections are always firm, dry and
leak free.
Make sure the hose is never crushed, kinked, or twis-
ted.
▶
▶