Beverage dispenser
The beverage dispenser is installed on the refrigerator door.
Loading and operating
1. Loading
Remove the lid of the dispenser compartment,
invert the bottle of water or other liquid and place
in position and then refit the lid. (Temperature
of the drinking water or beverage added into the
dispenser compartment must not be higher than
ambient temperature.)
When the water tank is refit or cleaned, remove
the pipe on the lid of water tank and then the
water tank. After filling or cleaning, refit the lid
and insert the pipe into the water tank and finally
place the tank in position.
Beverage dispenser
Water bottle
Water inlet
Lid
Water duct
12
