Haier HRF-450D 6 Series, User Manual

Page: 30 / 34

10- Installation
GB
10.9 Removing and installing the doors
In the event that you need to remove the appliance doors, please follow the door removal
and installation instructions below (Fig. 10.9).
1. Undo the hinge cover screw and remove the
cover. Release the cable connector.
2. Undo the screws holding the upper hinge in posi-
tion and then remove the hinge.
3. Lift the freezer compartment door to remove it.
2. 3.
1.
4.
WARNING!
▶
Before any operation, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶
The appliance is heavy. Always handle with at least two persons.
▶
Do not tilt the appliance more than 45° or place it horizontally on the ground
4. Refit the door by reversing the removal steps. En -
sure that the grounding cable will be fixed by the
screw.
Notice: Fridge door
The pictures show the removing of the freezer compartment door. For the fridge door
please use the corresponding parts on the other site.
10.9
30