3
Suggestion
Relocation of refrigerator.
Disconnect the power cord.
Remove water from the evaporating tray.
Take food out of the refrigerator compartments.
Fasten the doors with tape while moving to prevent them from opening
For safety, use 2 people to carry the refrigerator.
Do not lift the unit in a horizontal angle, however, it may be 45 degrees
tilted slightly.
INSTALLATION
Select a place with strong, level floor. If the floor is not quite level, adjust the height of
the screw accordingly (Fig 1).
1.
Allow sufficient clearance between the refrigerator s
’ back, also the side wall, so the door
can open fully and to minimize noise (Fig 2).
Avoid direct sunlight and heat. Direct sunlight may affect the enamel coating.
Heat sources nearby will cause higher electricity consumption (Fig 3).
2.
3.
5.
4.
Don t connect multiple appliances to one outlet.
’
It may cause fire. To avoid the possibility
of electrical shock, ground the refrigerator properly. The earth screw is located on the
rear side of the refrigerator (Fig 5).
Avoid operation of the refrigerator in a moist environment. Too much moisture will cause
frost to form on the evaporator, which will in turn, increase energy consumption (Fig 4).
7. After moving the refrigerator, allow to stand for 3-6 hours before switching on, to allow
cooling system to settle.
6. If you wish to connect to the refrigerator to an additional earthing source, attach
a grounding wire to the earth junction marked and connect to an external earthing rod.
Contact an electrican to ensure this is done in accordance with local regulations. (Fig 6).
10
.
cm
15
.
cm
30 cm.
Refrigerator
Unit
2.4 meters
Ground Wire
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5
Fig 6
