Preparation
1. Unpacking
Remove all packing materials.
2. Check attached accessories and materials.
Check if all accessories specified in the Packing List are
available. Contact the local distributor if shortage is found.
3. Ensure that the refrigerator is properly located.
(See section "Location")
4. Clean the refrigerator before using.
(See section "Cleaning")
5. Time lapse before power supply
Connect the refrigerator to power source at least 30
minutes after the refrigerator is sited and cleaned.
Caution: After unpacking, write down the model and manufacture number of the
refrigerator on the Warranty Certificate which will be required if technical services
are applied for.
Operation Manual
Quality
Certificate
Warranty
Certificate
6
Vacation
Before leaving for vacation
* Remove the food from refrigerator if the vacation is
short. And make sure that the door of the refrigerator
is properly closed.
* If the vacation is long, take out the food from the
refrigerator and disconnect the power. Wait until
t h e f r o s t i n s i d e m e l t s , c l e a n a n d d r y t h e
compartment. Leave the door open to prevent
formation of bad odor.
Moving the refrigerator
* Unplug the refrigerator.
* Remove all the food.
* Secure the shelves in the cold storage compartment,
vegetable and fruit tray and drawers in the freezer
with tape.
* Tightly close and tape the door of the refrigerator
* Do not tilt the refrigerator more than 45 degrees
Caution: Never place the refrigerator horizontally.
15
