English
16
English
Lift microwave, tilt it forward, and hook slots
1.
at back bottom edge onto four lower tabs of
mounting
plate.
Rotate front of oven up against cabinet
2.
bottom.
Insert a self-aligning screw through top
3.
center cabinet hole. Temporarily secure
the oven by turning the screw at least two
full turns after the threads have engaged.
(It will be completely tightened later.) Be
sure to keep power cord tight. Be careful
not to pinch the cord, especially when
mounting flush to bottom of cabinet.
Attach the microwave oven to the top cabinet.
4.
Insert 2 self-aligning screws through outer
5.
top cabinet holes. Turn two full turns on
each
screw.
Tighten center screw completely.
6.
Open the top cabinet and adjust the exhaust
adaptor to connect to the house duct.
Extend the house duct down to connect
1.
to the exhaust adaptor.
Seal exhaust duct joints using duct tape.
2.
7. Tighten the outer two screws to the top of the microwave oven. (While tightening
screws, hold the microwave oven in place against the wall and the top cabinet.)
8. Install grease filters. See the Owner’s Manual packed with the microwave.
A5. MOUNT THE MICROWAVE OVEN
A6. ADJUST THE EXHAUST ADAPTOR
A7. CONNECTING DUCTWORK
Cabinet Front
Cabinet Bottom Shelf
Filler Block
Microwave Oven Top
Equivalent
to Depth
of Cabinet
Recess
Self-Aligning Screw
Back of
Microwave
For Front-to-Back or
Side-to-Side Adjustment,
Slide the Exhaust Adaptor
as Needed
Blower Plate
Damper
House Duct
NOTE: When mounting the
microwave oven, thread power
cord through hole in bottom
of top cabinet. Keep it tight
throughout Steps 1–3. Do
not pinch cord or lift oven by
pulling cord.
1
2
5
6
