Function Setup
Function Setup
It is possible to select language, OSD translucent, position and screen display of the menu as follows:
1. Press MENU button once, and the button until the following menu appears on the screen:
B
C
A
2. Press button on the remote control to enter the menu of system setup.
3. Press to select desired option on the menu.
4. Press to adjust selected option.
Menu Language Option
Menu Timeout Option
Repeat step 3 and 4 to select menu display time for 5,10,15, 20, 25, 30 or 40 seconds.
Menu Background Option
Repeat step 3 and 4 to select OSD background between Translucent and Opaque.
Close Caption
Repeat step 3 and 4 to set up Off/CC1/CC2/CC3/CC4/TX1/TX2/TX3/TX4/XDS.
Function Setup
Owner s Manual 21
/
/
/
Auto Off
Repeat step 3 and 4 to select On/Off. If
, and there is no signal to the LCD TV monitor for 2 minutes ,
the LCD TV monitor will be in standby condition . If Off is
, and
there is no signal to the LCD TV monitor for 3 minutes without any operation , screen protection will be on the screen .
On is selected
Auto Off will be on the screen and for 3 minutes
selected
/
(Note: Close Caption is only available in AV and S-Video signal)
Repeat step 3 and 4 to select English, France or Espana as the menu language.
