![Haier HLH26BBTV Manual Download Page 13](http://html1.mh-extra.com/html/haier/hlh26bbtv/hlh26bbtv_manual_3294817013.webp)
Adjustment Setup
Adjustment Setup
When VGA
DVI input mode is set
VGA/DVI:
Display Mode Full Screen
Adjust
RGB
Reset
Auto Sync.
Color Temper Standard
Black Stretch On
B
C
A
1. Press MENU button on the remote controller and then use the
VOL+/- to select the ADJ.menu.
2.
3. Press the VOL+ button and then use CH+/- button for desired
adjust parameter option.
4. Press VOL+/-for desired adjust parameter option until satisfactory
value is achieved. When VGA signals are received, the automatic
mode is used for parameter adjustment.
Note
:
Adjust, RGB and Reset are functional only under VGA and DVI mode, and Auto Sync is functional in VGA mode.
Adjustment Setup
Press
CH+/-
to enter .
H Size
H Position
V Size
V Position
Phase Adjust
B
C
A
Red
Green
Blue
B
C
A
0
0
0
0
0
0
0
0
No selectable
In VGA and DVI input mode , H Position and V Position can be used to
adjust the picture position.
Display Mode
This will adjust the picture ratio.
Under the VGA signal, there are Full Screen , one to one and 4:3
mode for Display mode to select.
Under the AV1or Av2 signal, there are Full Screen, Vertical Zoom,
Half Zoom, Panorama and 4:3 Mode for Display Mode to select.
Under the DVI signal, there are Full Screen and 4:3 Mode for Display
Mode to select.
Adjust
this is opted for adjusting H Position and V Position as well as
relative parameters in VGA and DVI modes.(Phase Adjust is not
available in DVI)
RGB
this is opted for adjustment of the numerical value of red, green and
blue in VGA/DVI mode.
Reset
this is opted for initialization adjustment of parameters (After the operation,
Complete will be on the right of the option)
Auto sync
this is opted for adjustment of picture location frequency and phase
parameters in VGA mode. (Not available in DVI)
( After the operation, Complete will be on the right of the option.)
Color temperature
This will increase or decrease
Warm
(red) and
Cold
(blue) colors to suit
personal preferences.
Select
Cold
to give the white colors a blue tint,
Standard
to give the white
colors a neutral tint,
Warm
to give the white colors a red tint.