Universal Remote Control
Haier LCD HDTV/DVD
EN-32
Maintenance
Maintenance
Early malfunctions can be prevented. Careful and regular
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug
the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen
A
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
Make sure the excess water is off the screen, and
B
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Specification
Product Specification
Resolution
1366x768(Dot)
Power
requirement
120 V~ , 60 Hz
Color system
NTSC, ATSC, Clear QAM
External
Antenna
Impedance
75 ohm
Color
1,070,000,000 (1024 steps of each R,
G and B)
Operating
Temperature
Range
32~104 °F (0~40 °C)
Operating
Humidity
Range
Less than 80%
Maximum
Elevation
6561 feet (2000 m)
MODEL
Dimensen (WXDXH) Unit:inches/
mm (Including stand)
Weight
(pounds/kg)
32"
31.4X9.1 X22.6 inches
798X230X575 mm
24.1/11.0
Troubleshooting
Troubleshooting
For the sake of time and cost, it is strongly
recommended that you check out the problem
by yourself according to the instructions listed
hereunder before contacting the after-sales service
for technical assistance.
No picture,
no sound
Verify if the television is properly plugged.
Verify if the television is properly
supplied power.
Verify if electricity is available.
Blank screen
Verify if correct signals are input.
Press
INPUT
button to change signal
input to TV input.
Restart the television of power supply
is interrupted.
No sound
Press
Mute
button and verify if Mute
mode is set.
Switch to other channel and verify if
the same problem happens.
Press
VOL+
button to see if the
problem can be solved.
Poor sound
Verify if sound system is correct. Refer
to Page 20 for adjustments.
No picture
in some
channel
Verify if correct channel is selected.
Adjust the antenna.
Make adjustments by Fine Tune and
Manual Scan.