Operation / Maintenance
TV LCD-TFT Owner’s Manual
EN-22
Quick program view
Press to jump back and forth between two channels. The
TV alternates between the current channel and the last
channel that was selected.
Suppose the channel number you used just now is
A
8 and the channel number you are using is 18 (as
shown in the figure).
If you want to return to the last watched program
B
channel 8, you can simply press
RECALL
button.
If you want to return to channel 18, press the button again.
C
Maintenance
Maintenance
Early malfunctions can be prevented. Careful and regular
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug
the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust off your screen
A
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
Make sure the excess water is off the screen, and
B
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Specification
Product Specification
Resolution
HL40XP1
1920
s
1080 (Dot)
Power requirement
120V~ , 60Hz
Color system
NTSC, ATSC, Clear QAM
External Antenna
Impedance
75 ohm
Color
16,770,000 (256 steps
of each R, G and B)
Operating Temperature
Range
32~104 0F (0~40 0C)
Operating Humidity
Range
Less than 80%
Maximum Elevation
6561 feet (2000m)
MODEL
Dimensen (W
s
D
s
H)
Unit: inches/mm
(Including stand)
Weight
(pounds/kg)
HL40XP1
38.3
s
11.4
s
27.4 inches
972
s
290
s
696 mm
47.4/21.5
* The specifications shown above may be changed
without prior notice for quality improvement.
Troubleshooting
Troubleshooting
For the sake of time and cost, it is strongly
recommended that you check out the problem by
yourself according to the instructions listed hereunder
before contacting the after-sales service for technical
assistance.
