Switching the TV On or Off
1
First, connect power cord correctly.
2
Press power button. Your TV turns on.
3
Press again to turn off your TV. When you turn off your TV, it goes into standby mode.
Warning: When your TV is in standby mode, it is still receiving power. To completely disconnect power, unplug the
power cord.
Note: If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
Mute
1.Press
MUTE
button to mute the sound temporarily. A mute icon appears on the screen.
2.Press
MUTE
button or
VOL+
again to restore the sound.
The mute icon disappears.
Sleep button
Press
SLEEP
button to set the time : Off-5 min-10 min-15 min-30 min-45min-60 min-90 min-120 min-180 min-240min.
This feature allows you to turn off the television after a pre-selected number of minutes
- Button
Press to select additional channels (digital and analog) being broadcast by the same station. For example, to select
digital channel “11-1”, press “11”, then press “ - ” and “1”.
CH.LIST button
Press to display the program list. Press CH+/- to select the item and
OK
button to select the channel you desired.
FAVORITE button
Adding favorite channels
Press
CH.LIST
. The channel list opens. Press CH+/- to select a channel.
Press
FAVORITE
to add the channel to the favorites channel list.
To remove a favorite channel, open the channel list, select the channel you want to remove, then press
FAVORITE
.
Tuning to a favorite channel
Press
FAVORITE
The favorite channel list opens.
Press CH+/-
to select the channel.
Your LCD TV automatically tunes to the channel you selected.
SAP Broadcasts Setup
This TV can receive MTS stereo programs and SAP (Secondary Audio Program) that accompanies the stereo
program; if the station transmits an additional sound signal as well as the original one.
When having selected SAP button on the remote control, this TV can only receive the signal when the TV station
transmits the proper signals.
Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.
Select Mono if you want to listen to mono sound during stereo/SAP broadcasting.
Stereo or SAP can be received in a Analog channel.
1.
Use
MTS/SAP
to select your desired MTS mode in a analog signal. Each time you press
MTS/SAP
,
Mono
,
Stereo
or
SAP
appear. If other languages are available on the digital signal, select them with the
MTS/SAP
button.
2.
Press
EXIT
to save and return to TV viewing.
ARC button
Selects the Aspect Ratio. You can select
Zoom, Wide, Cinema or normal
.
Zoom
Choose Zoom
when you want to view the picture without any alteration. However, the top and bottom
portions of the picture will be cropped.
Wide
Choose wide
when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen.
Cinema
For letterbox pictures, bars may appear on the top and bottom on some programs.
Normal
Choose normal when you want to view the picture with original aspect ratio of the input signal.
CCD button
Basic Operating Instructions
Summary of Contents for HL40K2AFA
Page 3: ...Introduction CONTENT ...
Page 26: ......