Haier HL32K2, Service Manual, Page: 22 / 61

Installation
EN-11 Haier LCD HDTV
connect only one of either VGA IN or HDMI IN to
display the VGA on the TV.
If the graphic card on the computer does output •
analog and digital RGB simultaneously, set the TV
to either VGA or HDMI; (the other mode is set to
Plug and Play automatically by the TV.)
Then, make the corresponding audio connection.
C
If using a sound card, adjust the VGA sound as
required.
Back of TV PC/DVI PC
PC IN
How to use
Turn on the computer and the TV.
A
Use INPUT on the remote control to select VGA or
B
HDMI source.
Check the image on your TV. There may be noise
C
associated with the resolution, vertical pattern,
contrast or brightness in VGA mode. If noise
is present, change the VGA mode to another
resolution, change the refresh rate to another rate
or adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the VGA
graphic card can not be changed, change the VGA
graphic card or consult the manufacturer of the VGA
graphic card.
Note
Use a DVI cable.

Avoid keeping a fixed image on the TV’s screen

for a long period of time. The fixed image may
become permanently imprinted on the screen.
The synchronization input form for Horizontal and

Vertical frequencies is separate.
Resolution

Mode Resolution
Frame
frequency
(Hz)
VGA 640
s
480 60 Hz
SVGA 800
s
600
60 Hz
75 Hz
XGA 1024
s
768
60 Hz
75 Hz
HDMI and DVI input
When the source device (Blu-Ray player, DVD player
or Set Top Box) supports HDMI
How To Connect
Connect the source device to HDMI port of this TV
A
with an HDMI cable (not supplied with this product).
No separated audio connection is necessary.
B
How To Use
Turn on the TV. •
Turn on the Blu- Ray player, DVD player or Set Top •
Box.
Select HDMI input source on the TV using the INPUT
•
button or HDMI button on the remote control.
When the source device (DVD player or Set Top Box)
supports DVI
How To Connect
Connect the source device to HDMI port of this TV
A
with a HDMI-to-DVI cable (not supplied with this
product).
A separated audio connection is necessary.
B
C
If the source device has an analog audio output
connector, connect the source device audio output to
DVI Audio In port located on the left side of HDMI port.
How To Use
If the source device supports Auto DVI function, •
the output resolution of the source device will be
Service Manual
Model No.: HLC32K2
21