background image

  Service Manual

  Model No.: HL19K2

6

3.  Use only a grounded-tip soldering iron to solder or unsolder ES devices.

4.  Use only an anti-static type solder removal device. Some solder removal devices not 

classified as "anti-static" can generate electrical charges sufficient to damage ES devices.

5.  Do not use freon-propelled chemicals. These can generate electrical charges sufficient to 

damage ES devices.

6.  Do not remove a replacement ES device from its protective package until immediately before 

you are ready to install it.

(Most replacement ES devices are packaged with leads electrically shorted together by 

conductive foam, aluminum foil or comparable conductive material).

7.  Immediately before removing the protective material from the leads of a replacement ES 

device, touch the protective material to the chassis or circuit assembly into which the device will 
be installed.

CAUTION:

 Be sure no power is applied to the chassis or circuit, and observe all other safety 

precautions.

8.  Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise 

harmless motion such as the brushing together of your clothes fabric or the lifting of your foot 
from a carpeted floor can generate static electricity sufficient to damage an ES device.)

1-3-7. Ordering Spare Parts

Please include the following informations when you order parts. (Particularly the Version letter)

1. Model number, serial number and software version
The model number and serial number can be found on the back cover of each product. Software 

version can be found in the Spare Parts List.

2. Spare part No. and description
Spare part No. and description can be found in the Spare Parts List.

1-3-8. Photo used in this manual

The illustration and photos used in this Service Manual may not base on the final design of 

products, which may differ from your products in some way.

1-4. How to Read this Service Manual

1-4-1. Using icons:

Icons are used to attract the attention of the reader to specific information. The meaning of each 

icon is described in the table below:

Note:
A “note” provides information that is not indispensable, but may nevertheless be 

valuable to the reader, such as tips and tricks.

Summary of Contents for HL19K2a


























































Reviews: