Haier HL19D2 Owner'S Manual Download Page 26

26

This Haier brand product, when shipped in its 
original container, will be free from defective 
workmanship and materials, and agrees that it 
will, at its option, either repair the defect or 
replace the defective product with a new or 
re-manufactured equivalent, for parts or labor 
for the periods set forth below:

This warranty does not apply to the 
appearance of the product or the exterior 
of the product, which has been damaged 
or defaced, altered or modified in design 
or construction. It does not apply to the 
additional excluded items set forth below:

The warranty commences on the date the 
item was purchased and the original purchase 
receipt must be presented to the authorized 
service center before warranty repairs are 
rendered.

The limited warranty described herein is 
in addition to whatever implied warranties 
may be granted to purchasers by law. ALL 
IMPLIED WARRANTIES  INCLUDING THE 
WARRANTIES OF MERCHANTABILITY AND 
FITNESS FOR USE ARE LIMITED TO THE 
PERIOD(s) FROM THE DATE OF PURCHASE 
SET FORTH BELOW. Some states do not allow 
limitations on how long an implied warranty 
lasts, so the above limitation may not apply to 
you.

Neither the sales personnel of the seller nor 
any other person is authorized to make any 
warranties other than those described herein, 
or to extend the duration of any warranties 
beyond the time period described herein on 
behalf of Haier.

WARRANTY

The warranties described herein shall be 
the sole and exclusive warranties granted 
by Haier and shall be the sole and exclusive 
remedy available to the purchaser. Correction 
of defects in the manner and for the period 
of time described herein, shall constitute 
complete fulfillment of all abilities and 
Responsibility of Haier to the purchaser with 
respect to the product, and shall constitute 
full satisfaction of all claims, whether based on 
contract, negligence, strict duality or otherwise. 
In no event shall Haier be liable, or in any 
way responsible for any damages or defects 
in the product which were caused by repairs 
or attempted repairs performed by anyone 
other than an authorized service center or 
dealer; nor shall Haier be liable, or in any way 
responsible for incidental or consequential 
economic or property damage. Some states 
do not allow the exclusion of incidental or 
consequential damages, so that above exclusion 
may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC 
LEGAL RIGHTS. YOU MAY ALSO HAVE 
OTHER RIGHTS WHICH VARY FROM STATE 
TO STATE.

Warranty period for HL19D2 and HL24XD2 
1 year parts, 90 days labor; for HL32D2 and 
HL42XD2 1 year parts and labor.

Additional items excluded from warranty 
coverage: non-rechargeable batteries. What 
to do to obtain service or to obtain product 
literature, accessories, supplies or customer 
assistance: Simply call 1-877-337-3639. Be sure 
to have proof of purchase. 

Summary of Contents for HL19D2





























Reviews: