Washing Procedure
/
Detergent distribution drawer
There are instructions on the handle of the distribution drawer. Swing
out the drawer, three compartments can be seen.
Compartment 1: Pre-washing detergent. If pre-wash is not selected, do
not add detergent.
Compartment 2: Detergent for all washing programs. Detergent must be
added whetherpre-wash is selected or not.
Compartment 3: Softening agent, conditioning agent, perfume, etc
K: Display
Remaining time, set temperature, spinning speed, other function information, and error messages
are displayed. Refer to the Display Description
H: Wash programming knob and start button
By turning the knob clockwise or counterclockwise, the required program can be selected;
press the start button to start a program; press it again to pause
I: Speed button
Press this button to set a required spinning speed, which covers 0 rpm to 1400 rpm.
(0-1400rpm for HK1407I/ME 0-1200rpm for HK1207I/ME
0-1000rpm for HK1007I/ME 0-800rpm for HK807I/ME)
J : Temperature button
Press this button to set a required temperature. The selectable temperature range is
0-90
§
. (Some programs have temperature limits. Refer to the programming guide)
B+D: combination for keyboard lock
After a program is started, press the delay button and the
at the same
time for 3 seconds, the keyboard will be locked and "SAFE ON" will appear on the screen.
Press the two buttons again for 3 seconds, the keyboard will be unlocked and "SAFE OFF"
will be displayed. This function is used to protect the washing machine from being disturbed
during operation, such as accidental press of buttons or turning of knobs by children, as this
may affect or suspend the operation of a program. Note: If this function is activated during
a washing cycle, be sure to inactivate it at the end of the cycle when the "End" sign is
displayed.
Caution: If the keyboard lock is not activated, press the Start/Pause button and then cut off
the power, the suspended program will be canceled after power is resumed. Now turn the
program knob to reselect.
Functions
Notes:
1) When first using the washing machine,let it run unloaded for one program to
prevent the laundry from being tainted by oil or dirty water from the washing machine.
2) Do not overload the washing machine.
To get the best washing effect, an appropriate washing program should be selected
according to the laundry type.
Note: The above operations refer to conditions without power-off memory. Or the washing
machine will continue operation from where the program was broken. To clear memory,
press the Start/Pause button. Turn off the power for a few seconds and turn on again, all
the settings will be renewed.
1. Loading
Slide out the detergent drawer and put the required detergent and
softening agent into the corresponding boxes. Push back the drawer gently.
Caution:
1) For pre-washing program, detergent should be added to both
compartments 1 and 2. Compartment 2 allows only solid detergents.
For other programs, do not add detergent to compartment 1.
2) Do not overuse softener; otherwise, it will damage the artificial
fibers. Refer to the instructions during use.
2. Adding detergent
3. Selecting washing program
Open the door, put in the laundry piece by piece. Close the door tightly.
Extra Rinse