Fig. 3
3x40mm
screw
h
ole
expension
plug
wall plate
wall
1. Install the wall plate
● Use an impact drill with a
φ
9 mm masonry bit to drill 40mm deep holes in
the wall in the locations of the wall plate holes as shown in Fig.3.
● Fit the expansion plugs into the holes.
● Secure the wall plate to the wall using the mounting screws.
INSTALLATION INSTRUCTIONS
2
.
Install the decorative cover holder (if inner decorative cover extension
is to be used)
● Use an impact drill with a
φ9 mm masonry bit to drill 40mm deep holes in the
wall in the locationgs of the decorative cover holes as shown in Fig. 4.
● Fit the expansion plugs into the holes.
● Secure the decorative cover holder to the wall using the mounting screws.
6
2*40cm self tapping screws
wall plate
2*40cm self tapping screws
Fig.4
