INSTALLATION
4
12
1.NOTE:
●
●
●
-Leave a
●
2.HOB INSTALLATION
●
●
Confirm that you have the right model for your type of gas supply;
When unpacking, make sure that all of the parts of the gas hob are included.
CHOOSING THE SUITABLE SURROUNDINGS
-When choosing a place to put the gas hob, be sure to pick a spot that is firm and
level. Be sure to provide a heat insulation board.
-Keep paper, oil, and all other inflammable objects away from the gas hob.
t least 500mm distance between the gas hob and the gas bottle.
-Gas hob must always dispose their combustion fumes trough hoods connected
to flues, chimneys or straight outdoor.
-If it is not possible to install a hood, an electric fan can be installed on a window
or on an external wall in compliance with the provisions in force.
VENTILATION REQUIREMENTS
It is essential that the room in which the appliance is installed is permanently
ventilated for the efficient operation of the appliance and the safety of the users.
Check that the hob is in good condition after having removed the packages.
Never leave packaging materials (cardboard, bags, poly foam, etc.) within
children's reach since they could become potential sources of danger.
GAS CONNECTION
This is a LOW PRESSURE APPLIANCE and should only be used with a LOW
PRESSURE REGULATOR (2.8kPa). Use approved gas hose and always
secure the hose with a hose clamp. The method of installation and gas supply
must be in compliance with the Local Authorized Regulations of the area where
the hob is being installed.
BATTERY IGNITION
Press and turn the knob corresponding to the required burner anti clockwise till
it reaches the full flame position ON. You may hear a ticking sound from the
electronic igniter. The burner will be lit in a few seconds.Matches can be used to
light the hob in the event of power failure.
