3
Battery
Remove and install the battery
Dismantle by following procedures:
Remove cover of battery of the mobile phone.
Lift the bottom of battery upward and remove it from battery box.
Warning: power off before removing the battery. When the phone is power on or
connected to external power supply, it is forbidden to remove the battery.
Install by following procedures:
Align the metal contact point of battery with that of battery box, and snap the
battery in the box and press the battery downward until it is installed well.
Charge
Insert the charger on the supply.
Connect the right end of charger to the side port of mobile phone.
After connection, the screen of mobile phone displays Charger Connected ,
and it is charging, the battery icon shows the process of charge; if the phone is
power off, the screen will show the process of charge dynamically.
In low battery state, overusing the mobile phone will cause low voltage, and
the phone enter low voltage lock mode and can't power on normally. Charge the
battery, and the battery enters pre-charge mode process (about ten minutes);
