A - Program control knob
B - Start/Pause button
After selecting your desired drying program, press this button to start the dryer. To
pause the dryer while in operation, press this button again. The display will flase
digits and the machine will come to a halted . To resume drying , press this button
again.
C - LED screen
This screen displays the remaining time for a program and the delay time.
D - Delay button
This is a delay start button. It allows you to start the dryer after a preset time.
Press this button before you start your program. The delay range is between 1-
12 hours. Every touch of the button will be increments of one hour. After you have
set your delay time, Press the Start /Pause button to start the delay operation.
You will notice a light flash to the left of the delay button.
E - Set program
This program is used for custom setting. The shortest drying time which can be set
is 20 minutes (0:20) and longest drying time is 4 hours (4:00).
To set your drying time, select “SET” on the program. You will notice 1:40 flashing
on the LED display. To increase the drying time, press the START/PAUSE button
only while the time is flashing. This will increase the time in 10 minute increments.
Once you have set your desired drying time, let the flashing time come to a stop and
press “START/PAUSE” button to commence drying.
If you happen to miss pressing either buttons while the time is not still flashing, turn
the program knob to “OFF” and try again.
6
A
B
C
D
E
Summary of Contents for HDY60
Page 1: ...INNOVATIVE DESIGN ...
