Haier HDV70A1 Installation Instructions Manual Download Page 6

SAFETY AND WARNINGS

  

  Spontaneous combustion

  IMPORTANT!

       To reduce the risk of fire in a tumble dryer the following should be observed:

  Items that have been spotted or soaked with vegetable oil or cooking oil are a fire

    hazard and should not be placed in a tumble dryer.

  Oil-affected items can ignite spontaneously, especially when exposed to heat 

    sources such as a tumble dryer. The items become warm causing an oxidation 

    reaction in the oil. This oxidation creates heat. If the heat cannot escape the items 

    can become hot enough to catch fire. Piling, stacking or storing oil-affected items 

    can prevent heat from escaping creating a fire hazard.

  If it is unavoidable that fabrics that contain vegetable oil, cooking oil or have been

    contaminated by hair care products be placed in a tumble dryer, they should first 

    be washed in hot water with extra detergent – this will reduce, but not eliminate 

    the fire hazard. The cool down cycle of the dryer should be used to reduce the 

    temperature of these items. They should not be removed from the tumble dryer 

    and piled or stacked while hot. 

  Items that have previously been cleaned in, washed in, soaked in or spotted 

    with flammable liquids or solids, eg petrol/gasoline, kerosene, dry cleaning 

    solvents, vegetable or cooking oil, acetone, denatured alcohol, some brands of 

    spot removers, turpentine, waxes and wax removers or other flammable or 

    explosive substances should not be placed in a tumble dryer.

  Do not dry unwashed items in the tumble dryer.

  The dryer is not to be used if industrial chemicals have been used for cleaning.

  Fabric Softeners or similar products should not be used in a tumble dryer to 

    eliminate the effects of static electricity, unless this practice is specifically 

    recommended by the manufacturer of the fabric softener product.

  Rubber backed articles, foam rubber (latex foam), clothes or pillows fitted with 

    foam rubber pads, fibreglass, shoes containing rubber, shower caps, baby’s

    waterproof napkin covers and waterproof textiles should not be dried in the dryer. 

    These materials can, when heated, produce fire by spontaneous combustion.

  The maximum mass of dry textiles depends on your model. The 

HDV70A1 

model 

     is rated at 7kg.  Do not overload your dryer.

 

4

  A damaged power cord must be replaced by a Haier authorized service technician.  

The appliance must not be operated until it is repaired, as there is risk of electric 

shock.

  Do not install the dryer behind a lockable door, sliding door, or behind a door where

the hinge is on the opposite side to that of the dryer in such a way that the full 

opening of the door is inhibited. Ensure the dryer door can always be opened fully.

Summary of Contents for HDV70A1



















Reviews: