22
English
ERROR CODES
Code
Meaning
Possible cause
E1
Water Intake Problem
Faucet is not opened, water intake is restricted, or
water pressure is too low.
E4
Overflow
Some element of dishwasher is leaking. Turn main
water supply off immediately! Remove water from
around base before restarting dishwasher.
Your dishwasher has an error code indicator function. For certain appliance malfunctions, the corresponding error code will
be shown in the LED display:
Problem
Possible Causes
Possible Solution:
The dishes are
not clean.
The dishes were not loaded correctly
See “Loading the Dishwasher Rack” section
of this manual.
The program selected was not the
appropriate cycle for the condition of
the dishes.
Select a more intense program.
Not enough detergent was dispensed.
Use more detergent, or change the type of
detergent being used.
Items were blocking the rotation path
of the water spray arm.
Rearrange the items accordingly so that the
spray arm can rotate freely.
The filter assembly in the base of the
unit is not clean, is clogged, or is not
installed correctly.
(This may cause the spray arm jets to
become clogged).
Clean and/or fit the filter assembly
correctly.
Clean the spray arm jets. See the
“Cleaning the Spray Arm “section of this
manual.
Cloudiness on
the glassware.
This is a combination of soft water and
too much detergent.
Use less detergent if you have soft water
and select a shorter cycle to wash the
glassware to get them clean.
Black or gray
marks on dishes.
Aluminum utensils have rubbed against
the dishes.
Use a mild abrasive cleaner to remove the
marks
Detergent left
in the dispenser
cups.
Dishes blocked the detergent cups
not allowing them to open completely
during the wash cycle.
Rearrange the dishes accordingly and re-
run the wash cycle.
The dishes are
not dry
Improper loading
See “Loading the Dishwasher Rack” section
of this manual.
Too little rinse aid
Increase the amount of rinse aid dispensed
or refill the rinse aid dispenser if empty.
Dishes were removed from the washer
too soon.
Do not empty your dishwasher immediately
after the cycle ends. Open the door slightly
so that the steam can escape. Begin
unloading the dishwasher once the dishes
are barely warm to the touch.
Wrong program / cycle selected.
Shorter cycles/programs use lower
temperatures which also lowers cleaning
performance. Choose a cycle / program
with a longer wash time.
Using cutlery with a low quality
coating.
Water drainage is more difficult with these
items. Cutlery or dishes of this type are not
suitable for dishwasher use.
