English
21
Troubleshooting
Dishwasher does not work
• Check if the circuit breaker needs to be reset or if the fuse needs to be
replaced.
• Check if the unit is in "OFF" mode.
• Check if the door is open. You may need to close the door properly.
Dishware and glassware/flatware are cloudy and not properly cleaned
• Use of old or poor detergent.
You need to make sure that detergent is fresh.
• The water may be hard in your area.
You may need to install a water softener.
• Spray arm may be blocked.
You may need to rearrange dishware and utensils.
• Water pressure may be low.
You may need to adjust the water pressure.
Make sure it is between 20 to 120 (PSI).
• Water temperature may be lower than what is recommended.
(120 Degree F / 49 Degree C) You may need to adjust the water
temperature on your water heater.
• Overloading of dishware.
You may need to rearrange or remove some dishware from the load.
• (May have selected wrong cycle.) Inappropriate cycle selection.
You may need to select the proper cycle.
Dishes are not dry
• Low water temperature. You may need to regulate the water temperature
to 120˚F / 49˚C or select Heated Dry option.
• Make sure the rinse agent dispenser is filled and the proper amount is
used.
• Avoid nesting and do not overload.
• Load items in a tilted position if possible so the water will run off easily.
• Dishware washed in higher temperatures will dry faster.
• Some plastic materials may need to be towel dried.