Haier HD70-A82, User Manual

Page: 6 / 134

6 | English
UNPACKING 1 2
Remove all packaging material including
the polystyrene base. All packaging
material should be recycled.
1 Cut the strips.
2 Lift the cover upwards.
3 Remove the protective parts.
4 Remove the base.
Ensure that any plastic wrappings,
bags, etc are kept out of the reach of
babies and young children. Danger of
suffocation.
3 4
INSTALLATION 1 2
1 Check the dryer does not rock or
wobble.Adjust the four feet to level the
dryer before operation.
2 Make sure the socket meets the
requirements and connect it to an earthed socket outlet.
• Do not install in a room which is susceptible to frost. Water may cause damage
once it starts to freeze.
• Transport the dryer in a vertical upright position.
• There may be residual water in the dryer.
This can leak out if the dryer is at an angle.
TECHNICAL DATA
Power
220 - 240 V~ / 50 Hz
Nominal load (kg)
HD70-A82 7
HD80-A82 8
Drying programs 12
Max. power (W) 900
Fuse (A) min. 10
Ambient temperature (°C) 5 - 35
Dimensions (H x D x W mm)
845 x 650 x 595
Net weight (kg)
approx. 51,5
Water protection level IPX4
WARNING. Following transportation and
installation, you MUST leave the dryer to
stand for two hours before use.