background image

5

WARNING

Electrical Shock Hazard

The electrical power to the oven branch circuit must be shut off while 

line connections are being made.
Do not use an extension cord with this appliance.
Electrical ground is required on this appliance. The free end of the green 

wire (the ground wire) must be connected to a suitable ground. This 

wire must remain grounded to the oven.
If cold water pipe is interrupted by plastic, non metallic gaskets, union 

connections or other insulating materials, DO NOT use for grounding.
DO NOT ground to a gas pipe.
DO NOT have a fuse in the NEUTRAL or GROUNDING circuit. A fuse in 

the NEUTRAL or GROUNDING circuit could result in an electrical shock.
Check with a qualified electrician if you are in doubt as to whether the 

appliance is properly grounded.
Failure to do so could result in death or serious injury.

Use a 3-wire, UL listed, 40-amp power supply cord (pigtail); or if local codes do 

not permit ground through the neutral, use a 4-wire power supply cord rated at 

250 volts, 40 amps and investigated for use with ranges.
Electrical Connection
To properly install your range, you must determine the type of electrical connection 

you will be using and follow the instructions provided for it here.

• 

Range must be connected to the proper electrical voltage and frequency as 

specified on the model/serial number rating plate. All models are dual rated, and 

designed to be connected to either 208/240V AC, 60Hz, 3-wire or 4-wire, two-

phase power supply.

Circuit Required

• 

208V, 60Hz

• 

240V, 60Hz

• 

12AMP

• 

15AMP

• 

The electrical supply should be a 3-wire or 4-wire, two-phase AC. Install a 

suitable conduit box (not furnished). An appropriately sized, U-listed conduit 

connector must be used to correctly attach the conduit to the junction box. 
IMPORTANT: Local Codes may vary; installation electrical connections and 

grounding must comply with all applicable local codes. 

If local codes permit grounding through the electrical supply neutral, connect both 

the white neutral wire and the green ground wire from the oven to the white neutral 

electrical supply wire. 

Summary of Contents for HCR2250ADS





















Reviews: